SE Electronics
sE4400
sE4400
All-Metal Multi-Pattern Condenser Mic, 4 Switchable Patterns, Includes Shockmount, Thread Adapter, Metal Case
Free Shipping
Features
- Four switchable patterns: cardioid, hypercardioid, omnidirectional, figure-8
- Hand-crafted 1" gold-sputtered true condenser capsule for vintage character
- Die-cast all-metal housing with spring steel wire mesh grille
- 157 dB max SPL with the -20 dB pad, plus 40 / 80 Hz bass-cut filters
- Close-miking shockmount, thread adapter and metal case included
Couldn't load pickup availability
What's Included in the box
- sE4400 Microphone
- Custom Shockmount
- Thread Adapter
- Metal Case
SKU: SKU: sE4400
View full details







Product Description
At its center is a hand-crafted 1" gold-sputtered true condenser capsule, individually tuned in the sE factory, delivering the warm vintage character the 4400 line is known for. Max SPL reaches 157 dB with the -20 dB pad, and switchable 40 and 80 Hz bass-cut filters trim low-end buildup on close-miked sources.
Construction is aimed squarely at day-to-day tour life: die-cast all-metal housing, metal switches and a spring steel wire mesh grille that survives handling a plastic-bodied mic would not. Discrete electronics keep the feature set focused on what actually gets used.
At 290 g and 146 mm long, the body slips into positions larger condensers cannot reach, and the close-miking shockmount helps you get it right up on a source. Recommended for lead vocals, orchestral strings, drums and overheads, electric guitar cabs, piano, acoustic guitar, woodwinds and brass. Shockmount, thread adapter and metal case are included.
Features
-
Four Patterns, One Mic
Cardioid, hypercardioid, omnidirectional and figure-8 cover focused vocals, open room capture and rejecting a stage monitor by aiming a null at it.
-
Classic Character
The hand-crafted 1-inch gold-sputtered capsule is individually tuned in the sE factory, giving vocals and strings a warm vintage weight.
-
Built For The Road
Die-cast metal housing, metal switches and a spring steel grille take the knocks of load-ins without changing how the mic sounds.
-
Handles Loud Sources
Max SPL of 157 dB with the pad engaged lets you place it on a snare, brass section or guitar cab without the signal breaking up.
-
Reach Tight Positions
A compact 146 mm body paired with the close-miking shockmount gets the capsule into spots around a kit where bulkier mics will not fit.
Technical Specifications
- Product Type Multi-Pattern Large-Diaphragm Condenser Microphone
- Capsule Hand-crafted 1" gold-sputtered true condenser
- Diaphragm Gold-sputtered mylar
- Polar Patterns Cardioid, hypercardioid, omnidirectional, figure-8
- Frequency Range 20 Hz - 20 kHz
- Sensitivity 25 mV/Pa (-32 dBV)
- Max SPL 137 / 147 / 157 dB (0 / 10 / 20 dB pad, 0.5% THD)
- Equivalent Noise Level 13 dB(A)
- Signal to Noise Ratio 81 dB
- Low-Cut Filter 40 / 80 Hz, 6 dB / Oct, switchable
- Attenuation Pad -10 / -20 dB, switchable
- Electrical Impedance 22 Ohms
- Connectivity 3-pin male XLR connector
- Powering 48V phantom power (P48 according to IEC 61938)
- Weight 290 g (10.23 oz.)
- Dimensions 146 mm length x 58 mm width x 29 mm diameter (5.75 x 2.32 x 1.10 in.)