sE7 sideFire Pair
SE Electronics
sE7 sideFire Pair
sE7 sideFire Pair
Side-Fire Small-Diaphragm Condenser Mic Pair, 90-Degree Capsules, Includes Mic Clips, Wind Screens
Free Shipping
Features
- Two side-firing mics for stereo miking in cramped positions
- Capsules rotated 90 degrees so the body never has to face the source
- 1/2" back-electret capsules with Class-A circuitry and transformerless outputs
- Switchable -20 dB pads take max SPL handling to 156 dB per mic
- Switchable 80 Hz low-cut filters cut stage rumble and kick bleed
Couldn't load pickup availability
What's Included in the box
- (2) sE7 sideFire Microphones
- Mic Clips (with thread adapters)
- Wind Screens
SKU: SKU: sE7sF Pair
View full details






Product Description
Rotating the capsule 90 degrees means the body no longer has to point at the source, so each mic fits into positions where an end-firing pencil condenser cannot be aimed properly. Everything behind the capsule matches the standard sE7: a 1/2" back-electret condenser element with optimized acoustics, discrete Class-A circuitry and a transformerless output, holding clear, natural response from 20 Hz to 20 kHz.
Ultra low-noise components keep self-noise at 16 dB with a 78 dB signal-to-noise ratio on both channels. Switchable -20 dB pads raise max SPL to 156 dB per mic for close work on loud sources, and switchable 80 Hz low-cut filters strip stage rumble and kick bleed before the preamp.
Each body measures 23 mm across and 130 mm long at 163 g. Recommended for acoustic guitar, choir, orchestral strings, piano, woodwinds, drums, percussion and overheads. Mic clips with thread adapters and wind screens are included for both mics.
Features
-
Two Mics For Tight Spots
Both capsules sit at 90 degrees to the body, so hi-hat and ride positions or a stereo pair under a piano lid become straightforward.
-
Consistent Across Channels
Both mics share the same 1/2-inch back-electret capsule and Class-A signal path, so left and right stay balanced without corrective EQ.
-
Quiet On Soft Sources
Self-noise of 16 dB and a 78 dB signal-to-noise ratio keep acoustic guitar, choir and orchestral takes clean on both channels.
-
Handles Loud Placement
Switchable -20 dB pads raise max SPL to 156 dB per mic, so close positions on snare, hi-hat and percussion stay undistorted.
-
Cut Rumble At The Source
Switchable 80 Hz low-cut filters remove stage rumble and kick bleed from both channels before the signal reaches your preamp.
Technical Specifications
- Product Type Side-Firing Small-Diaphragm Back-Electret Condenser Microphone Pair
- Sensitivity 19 mV/Pa (-34.5 dBV)
- Capsule 1/2" back-electret condenser
- Polar Pattern Cardioid
- Frequency Range 20 Hz - 20 kHz
- Max SPL 136 / 156 dB (0 / 20 dB pad)
- Equivalent Noise Level 16 dB
- Dynamic Range 120 / 140 dB (0 / 20 dB pad)
- Signal to Noise Ratio 78 dB
- Low-Cut Filter 80 Hz, 6 dB / Oct, switchable
- Attenuation Pad -20 dB, switchable
- Electrical Impedance Less than 200 Ohms
- Recommended Load Impedance Greater than 1k Ohms
- Connectivity 3-pin male XLR connector
- Powering 48V phantom power (P48 according to IEC 61938)
- Current Consumption 3.0 mA
- Weight 163 g (5.75 oz.) per microphone
- Dimensions 23 mm diameter x 130 mm length (0.91 x 5.12 in.) per microphone