SE Electronics
T2
T2
Multi-Pattern Condenser Mic, 1" Titanium-Sputtered Capsule, 4 Patterns, Includes Shockmount, Thread Adapter, Metal Case
Free Shipping
Features
- Hand-crafted 1" titanium-sputtered true condenser capsule
- Four switchable patterns: cardioid, hypercardioid, omnidirectional, figure-8
- Titanium diaphragm is stiffer and lighter than gold for faster transients
- 157 dB max SPL with the -20 dB pad, plus 40 / 80 Hz bass-cut filters
- Close-miking shockmount, thread adapter and metal case included
Couldn't load pickup availability
What's Included in the box
- T2 Microphone
- Custom Shockmount
- Thread Adapter
- Metal Case
SKU: SKU: T2 NEW
View full details











Product Description
Four patterns cover most of what a session throws at you. Cardioid for focused close work, hypercardioid for tighter rejection on a loud stage, omni for open room and ensemble capture, figure-8 for two performers facing each other or for aiming a null at a problem source. Max SPL reaches 157 dB with the -20 dB pad, and switchable 40 and 80 Hz bass-cut filters trim low-end buildup at the source.
The design keeps the control set to what engineers reach for, with discrete electronics and down-to-earth build quality rather than features that never get used. The all-metal body measures 146 mm long and weighs 290 g, small enough to reach positions larger side-firing condensers cannot.
Recommended for drums, percussion, overheads, hi-hats, orchestral strings, piano, bass and electric guitar cabs, acoustic guitar, vocals, woodwinds and brass. A close-miking shockmount, thread adapter and metal case are included, and a matched-pair configuration is available.
Features
-
Titanium Speed
The titanium-sputtered diaphragm is stiffer and about three times lighter than gold, so drum and percussion attacks arrive sharp instead of rounded.
-
Four Patterns, One Mic
Cardioid, hypercardioid, omnidirectional and figure-8 cover focused close work, open room capture and rejecting a problem source with a null.
-
Built For Loud Placement
Max SPL of 157 dB with the pad engaged lets you put it inches from a snare, hi-hat or bass cab without distortion.
-
Trim The Low End At The Source
Switchable 40 and 80 Hz bass-cut filters remove proximity buildup and stage rumble before the signal ever reaches your preamp.
-
Reach Tight Positions
A compact 146 mm all-metal body with close-miking shockmount gets the capsule into spots around a kit that bulkier mics cannot occupy.
Technical Specifications
- Product Type Multi-Pattern Large-Diaphragm Condenser Microphone
- Capsule Hand-crafted 1" titanium-sputtered true condenser
- Diaphragm Titanium-sputtered mylar
- Polar Patterns Cardioid, hypercardioid, omnidirectional, figure-8
- Frequency Range 20 Hz - 20 kHz
- Sensitivity 25 mV/Pa (-32 dBV)
- Max SPL 137 / 147 / 157 dB SPL (0 / 10 / 20 dB pad, 0.5% THD)
- Equivalent Noise Level 13 dB(A)
- Signal to Noise Ratio 81 dB
- Low-Cut Filter 40 / 80 Hz, 6 dB / Oct, switchable
- Attenuation Pad -10 / -20 dB, switchable
- Electrical Impedance 22 Ohms
- Connectivity 3-pin male XLR connector
- Powering 48 Volts according to IEC 61938
- Weight 290 g (10.23 oz.)
- Dimensions 146 mm length x 58 mm width x 29 mm diameter (5.75 x 2.32 x 1.10 in.)