T2 Pair
SE Electronics
T2 Pair
T2 Pair
Multi-Pattern Condenser Mic Pair, Titanium-Sputtered Capsules, 4 Patterns, Includes Shockmounts, Stereo Bar, Metal Case
Features
- Two T2 mics plus a stereo mounting bar for XY, Blumlein and mid-side setups
- Four switchable patterns per mic: cardioid, hypercardioid, omni, figure-8
- Hand-crafted 1" titanium-sputtered true condenser capsules in both bodies
- 157 dB max SPL with the -20 dB pad for close overhead work
- Close-miking shockmounts, thread adapters and metal case included
Couldn't load pickup availability
What's Included in the box
- (2) T2 Microphones
- (2) Custom Shockmounts
- (2) Thread Adapters
- Stereo Mounting Bar
- Metal Case
SKU: SKU: T2 (P)
View full details











Product Description
Titanium is much stiffer and roughly three times lighter than gold, so transients arrive with accurate definition rather than rounding off. Across a stereo pair, that keeps cymbal and stick detail intact on overheads and preserves the leading edge of piano and percussion.
Having four patterns in both bodies opens up every common stereo technique: cardioid XY, figure-8 Blumlein, mid-side pairing, spaced omni arrays. Max SPL reaches 157 dB with the -20 dB pad, so close overheads on a hard-hit kit stay clean, and switchable 40 and 80 Hz bass-cut filters trim low-end buildup on both channels.
Discrete electronics keep the control set to what engineers actually use. Each all-metal body measures 146 mm long at 290 g, compact enough to reach around a kit where larger condensers cannot. Recommended for drums, percussion, overheads, hi-hats, orchestral strings, piano, bass and electric guitar cabs, acoustic guitar, vocals, woodwinds and brass. Two shockmounts, thread adapters, the stereo mounting bar and a metal case are included.
Features
-
Stereo Rig In One Case
Two mics, two shockmounts and a stereo mounting bar arrive together, so XY, ORTF and Blumlein arrays need no extra hardware.
-
Every Stereo Technique Covered
Four patterns per mic means Blumlein with figure-8, mid-side pairing and spaced omni arrays all come from the same two microphones.
-
Titanium Speed On Both Channels
Titanium-sputtered diaphragms are stiffer and lighter than gold, keeping cymbal and stick detail sharp across a stereo overhead pair.
-
Loud Sources, No Strain
Max SPL of 157 dB per mic with the pads engaged keeps close overheads on a hard-hit kit clean and undistorted.
-
Trim The Low End At The Source
Switchable 40 and 80 Hz bass-cut filters remove proximity buildup and stage rumble from both channels before your preamp sees them.
Technical Specifications
- Product Type Multi-Pattern Large-Diaphragm Condenser Microphone Pair
- Capsule Hand-crafted 1" titanium-sputtered true condenser
- Diaphragm Titanium-sputtered mylar
- Polar Patterns Cardioid, hypercardioid, omnidirectional, figure-8
- Frequency Range 20 Hz - 20 kHz
- Sensitivity 25 mV/Pa (-32 dBV)
- Max SPL 137 / 147 / 157 dB SPL (0 / 10 / 20 dB pad, 0.5% THD)
- Equivalent Noise Level 13 dB(A)
- Signal to Noise Ratio 81 dB
- Low-Cut Filter 40 / 80 Hz, 6 dB / Oct, switchable
- Attenuation Pad -10 / -20 dB, switchable
- Electrical Impedance 22 Ohms
- Connectivity 3-pin male XLR connector
- Powering 48 Volts according to IEC 61938
- Weight 290 g (10.23 oz.) per microphone
- Dimensions 146 mm length x 58 mm width x 29 mm diameter (5.75 x 2.32 x 1.10 in.) per microphone