SE Electronics
V7 PTT
V7 PTT
Talkback Handheld Dynamic Mic, Supercardioid, Noiseless Push-To-Talk Button, With Cradle And Adapters
Free Shipping
Features
- Push-to-talk button opens the channel only while you hold it
- Virtually noiseless switch keeps clicks out of in-ear mixes
- Supercardioid pattern gives high gain before feedback
- Includes cradle, thread adapters, and 1/4, 3/8, 5/8 in. locking nuts
- All-metal housing with beveled spring steel grille
Couldn't load pickup availability
What's Included in the box
- V7 PTT microphone
- Mic cradle
- Thread adapters (5/8 in. to 1/4 in. and 5/8 in. to 3/8 in.)
- Locking nuts (1/4 in., 3/8 in., 5/8 in.)
- Black internal windscreen
- Zipper pouch
SKU: SKU: V7 PTT
View full details








Product Description
Push-to-talk solves the problem of a live talkback mic that nobody remembered to mute. The channel is open only while your thumb is down, which keeps console chatter, coffee cups, and side conversations out of in-ear mixes and the monitor wedges. The button itself is virtually noiseless, so there is no click landing in a performer's ears every time you speak.
The supercardioid capsule rejects sound from the sides and rear, giving high gain before feedback at a front-of-house or monitor position that sits inside the PA coverage. A 40 Hz to 19 kHz range at 2.0 mV/Pa keeps talkback intelligible over a loud mix rather than muddy.
A mic cradle ships in the box along with thread adapters in 5/8 to 1/4 in. and 5/8 to 3/8 in., plus locking nuts in 1/4, 3/8, and 5/8 in. That covers mounting on console gooseneck arms, desk stands, and studio booms without a trip to the hardware bin.
Housing is all metal with a beveled spring steel grille. Built for live sound engineers, monitor techs, stage crews, broadcast control rooms, studio control room talkback, and general paging.
Features
-
No More Live Talkback Mics
The channel opens only while the button is held, so console chatter and side conversations never reach the in-ears or the wedges by accident.
-
Silent Switching
The push-to-talk button is virtually noiseless, so performers do not get a click in their ears each time you press to speak mid-song.
-
Cuts Through A Loud Mix
A 40 Hz to 19 kHz range at 2.0 mV/Pa with supercardioid rejection keeps talkback intelligible from a position sitting inside PA coverage.
-
Mounts Anywhere
A cradle plus 5/8 to 1/4 and 5/8 to 3/8 in. adapters and three locking nuts fit console arms, desk stands, and studio booms straight away.
-
Same V7 Sound
The capsule matches the standard V7, so a talkback position sounds consistent with the vocal mics already in your rig.
Technical Specifications
- Product Type Talkback Handheld Dynamic Microphone
- Capsule Dynamic
- Polar Pattern Supercardioid
- Frequency Range 40 Hz - 19 kHz
- Sensitivity 2.0 mV/Pa (-54 dBV)
- Electrical Impedance 300 Ohms
- Magnet Neodymium
- Voice Coil Aluminum
- Switch Virtually Noiseless Push-To-Talk
- Connectivity 3-Pin Male XLR
- Housing All-Metal With Beveled Spring Steel Grille
- Included Mounting Mic Cradle, 5/8 In. To 1/4 In. And 5/8 In. To 3/8 In. Thread Adapters, 1/4 In., 3/8 In. And 5/8 In. Locking Nuts
- Recommended Use Talkback For Live Sound Engineers And Tech Crew, General Paging
- Weight 307 g (10.83 oz)
- Dimensions 54 mm (2.13 in.) Diameter x 184 mm (7.24 in.) Length