Skip to product information
1 of 7
Used

SUNDOWN AUDIO

Sundown Audio SA-6.5SW 6.5" 300w RMS Car Audio Subwoofer DVC 4-Ohm SA Series Sub

Sundown Audio SA-6.5SW 6.5" 300w RMS Car Audio Subwoofer DVC 4-Ohm SA Series Sub

6.5" Shallow-Mount Subwoofer, 300W RMS, Dual 4-Ohm, 3.75" Depth, Solid-Pole Motor

Free Shipping

Regular price $109.39
Sale price $109.39 Regular price $154.99
Save 29%
Shipping calculated at checkout.
Features
    • 300W RMS and 600W peak handling from a 6.5-inch cone
    • Only 3.75 inches of mounting depth with a solid-pole motor
    • Dual 4-ohm coils wire to 2 or 8 ohms, or 1 ohm as a pair
    • 10mm Xmax and 20mm of mechanical excursion for deep output
    • Needs just 0.15 cu ft sealed or 0.3 cu ft ported
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • SA-6.5SW D4 6.5" Dual 4-Ohm Subwoofer

SKU: SKU: SA-6.5SW D4 U

View full details

Product Description

The SA-6.5SW D4 delivers real bass in under four inches of mounting depth. It handles 300W RMS and 600W peak on dual 4-ohm coils, in a 6.5-inch frame measuring 3.75 inches deep with a 5.875-inch cutout.

Sundown uses a solid-pole design so the back plate can rest against the rear wall of the enclosure, cutting the depth requirement further. With 10mm Xmax and 20mm of mechanical excursion, this small cone travels far enough for genuinely deep output rather than the thin midbass typical of compact subs.

A large aluminum faraday ring keeps distortion low for an even response, high-temperature voice coil wire handles the thermal load, and integrated vent channels add cooling. Spring-loaded terminals make wiring quick in a tight install.

The dual 4-ohm coil configuration is the one to choose when you are running two subs or an amplifier that likes higher impedance. A single sub wires to 2 ohms or 8 ohms, and a pair of them drops to 1 ohm for a small monoblock.

Box requirements are minimal: 0.15 cu ft sealed for tight bass in a stealth box, or 0.3 cu ft ported with 4 sq in of port tuned to 40 Hz for more output, with only 0.02 cu ft of cone displacement to account for. Typical builds include under-seat and behind-seat pickup enclosures, door and kick panel boxes, side-by-side and motorcycle systems, and compact sealed boxes for cars where cargo room cannot be sacrificed.

Features

    • Bass In Under Four Inches

      A solid-pole design lets the back plate sit against the enclosure wall, holding total depth to 3.75 inches for under-seat and behind-seat boxes.

    • Wiring For Two-Sub Builds

      Dual 4-ohm coils give you a 2-ohm or 8-ohm load from one sub, or a 1-ohm load from a pair on a single compact monoblock.

    • Excursion That Goes Low

      With 10mm Xmax and 20mm of mechanical travel, this 6.5-inch cone reaches genuinely deep notes instead of stopping at midbass.

    • Tiny Box Requirement

      It needs only 0.15 cu ft sealed or 0.3 cu ft ported at 40 Hz, so a stealth enclosure keeps nearly all of your cargo space.

    • Cooling For Long Playback

      High-temperature voice coil wire and integrated vent channels move heat away from the coil, so output holds steady during extended listening.

Technical Specifications

  • Product Type 6.5" Shallow-Mount Car Subwoofer
  • RMS Power 300W
  • Peak Power 600W
  • Impedance Dual 4 Ohm
  • Xmax 10mm
  • Mechanical Excursion 20mm
  • Re 7.1 ohms
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov