SAEv4-600D
SUNDOWN AUDIO
SAEv4-600D
SAEv4-600D
Class D Mono Amplifier, 600W RMS At 1 Ohm, Variable Filters, Wired Remote Included
Free Shipping
Features
- 600W x 1 at 1 ohm, 450W x 1 at 2 ohms, 250W x 1 at 4 ohms
- 12dB variable low pass filter from 40 Hz to 180 Hz
- 12dB subsonic filter from 10 Hz to 40 Hz
- Phase shift control across 0 to 180 degrees
- Compact 9.8-inch chassis with a 60A fuse requirement
Couldn't load pickup availability
What's Included in the box
- SAEv4-600D Class D Mono Amplifier
- Wired Remote Control With Clipping Indicator
SKU: SKU: SAEv.4-600D
View full details










Product Description
The half-bridge Class D design keeps output clean across the impedance range, and the control set covers real tuning work. A 12dB variable low pass filter from 40 Hz to 180 Hz sets the crossover to your midbass, a 12dB subsonic filter from 10 Hz to 40 Hz keeps content below box tuning out of the woofer, and phase shift control across 0 to 180 degrees times the sub to the front stage.
Protection circuitry covers thermal, voltage, speaker short, and DC-offset conditions, with power, clipping, and protection indicators on the chassis. The heavy aluminum heat sink handles thermal control through extended playback in a warm cabin or trunk.
The included wired remote control has a clipping indicator, so sub level is adjustable from the driver seat and you can hear and see where clean output ends.
Operating voltage is 10.5V to 15.5V with a 60A recommended fuse, so many installs work with existing wiring. At 9.8 by 6.3 by 2.75 inches, it fits under a seat, behind a panel, or beside an existing amplifier.
Features
-
Right-Sized For One Sub
At 600W into 1 ohm and 450W into 2 ohms, this monoblock matches a single 8, 10, or 12-inch subwoofer without unnecessary current draw.
-
Fits In Small Spaces
A 9.8-inch chassis and 60A fuse requirement let this amp mount under a seat or behind a panel, often on existing power wiring.
-
Set The Crossover Point
The 12dB low pass filter sweeps 40 Hz to 180 Hz, so you can place the handoff between sub and midbass wherever your vehicle sounds best.
-
Keep The Woofer Safe
A 12dB subsonic filter adjustable from 10 Hz to 40 Hz blocks content below box tuning that wastes power and risks mechanical damage.
-
Control From The Driver Seat
The included wired remote adjusts bass level while you listen, and its clipping indicator shows when output has passed the clean limit.
Technical Specifications
- Product Type Class D Mono Car Amplifier
- Amplifier Type Class D
- 1 Ohm RMS Power 600 x 1
- 2 Ohm RMS Power 450 x 1
- 4 Ohm RMS Power 250 x 1
- Variable 12dB Low Pass Filter 40 Hz - 180 Hz
- Variable 12dB Subsonic Filter 10 Hz - 40 Hz
- Phase Shift Control 0 - 180 Degrees
- Input Sensitivity 6V Max
- Signal / Noise Ratio 92 dB
- Protection Circuitry Thermal, Voltage, Speaker Short, DC-Offset
- Heat Sink Heavy Aluminum
- Remote Wired Remote With Clipping Indicator
- Operating Voltage DC 10.5V - 15.5V
- Recommended Fuse 60 Amps
- Dimensions 9.8" L x 6.3" W x 2.75" H