SUNDOWN AUDIO
SALT-3
SALT-3
Class D Mono Amplifier, 3000W RMS At 1 Ohm, Strappable, 24dB Filters, Display Remote
Features
- 3000W x 1 at 1 ohm, 1500W x 1 at 2 ohms, 750W x 1 at 4 ohms
- Strappable to a second SALT-3 for 6000W x 1 at 2 ohms
- Rated output tested at 12.8V with less than 1 percent THD
- 24dB variable subsonic and low pass filters for sharp cutoffs
- Wired remote displays voltage, temperature, and clipping
Couldn't load pickup availability
What's Included in the box
- SALT-3 Class D Mono Amplifier
- Wired Remote Control With Voltage, Temperature, and Clipping Display
SKU: SKU: SALT-3
View full details










Product Description
SALT stands for Sundown Audio Low-Voltage Technology, and the point is honest power. The rating is tested at 12.8V with less than 1 percent THD, so you get the published output from a normal electrical system instead of needing 14V or more to hit the number. Operating range is 9V to 15.5V and efficiency is above 90 percent.
Tuning is competition oriented. A 24dB variable subsonic filter covers 10 Hz to 50 Hz and a 24dB variable low pass filter covers 35 Hz to 250 Hz, both steeper than typical 12dB designs. Variable bass boost at 45 Hz adds up to 9 dB, and phase shift control across 0 to 180 degrees aligns the sub with the front stage. Frequency response runs 10 Hz to 250 Hz, signal to noise ratio is above 90 dB, and damping factor is above 400.
Onboard indicators cover power, clipping, and protection, backed by thermal, voltage, speaker short, and DC-offset protection circuitry. The included wired remote displays voltage, temperature, and clipping at a glance.
A 300A fuse is recommended. Dimensions are 19.68 by 8.67 by 2.80 inches.
Features
-
Full Power At Real Voltage
Tested at 12.8V with under 1 percent THD, the SALT-3 hits its rating on a normal electrical system rather than demanding 14V or more.
-
Double Up Later
Strap a second SALT-3 and the pair produces 6000W at 2 ohms, so your first amplifier stays in the build as the system grows.
-
Competition-Style Filtering
The 24dB subsonic and low pass filters cut twice as steeply as 12dB designs, keeping output inside the range your enclosure handles best.
-
Watch Your Electrical System
The included wired remote displays voltage, temperature, and clipping, so a sagging alternator or hot amp shows up before it costs you a woofer.
-
Shape And Align The Bass
Variable bass boost at 45 Hz adds up to 9 dB, and phase shift control across 0 to 180 degrees times the sub to your front speakers.
Technical Specifications
- Product Type Class D Strappable Mono Car Amplifier
- Amplifier Type Digital Class D Monoblock
- 1 Ohm RMS Power 3,000 x 1
- 2 Ohm RMS Power 1,500 x 1
- 4 Ohm RMS Power 750 x 1
- Strapped Power 6,000 x 1 @ 2 Ohms
- Variable 24dB Subsonic Filter 10 Hz - 50 Hz
- Variable 24dB Low Pass Filter 35 Hz - 250 Hz
- Bass Boost 0-9 dB @ 45 Hz
- Phase Shift Control 0 - 180 Degrees
- Frequency Response 10 Hz - 250 Hz
- Input Sensitivity 6V - 0.2V
- Efficiency Above 90%
- Signal / Noise Ratio Above 90 dB
- Damping Factor Above 400
- Tested Voltage & THD 12.8V, Less Than 1% THD
- Protection Circuitry Thermal, Voltage, Speaker Short, DC-Offset
- Remote Wired Remote With Voltage, Temperature, and Clipping Display
- Operating Voltage DC 9V - 15.5V
- Recommended Fuse 300 Amps
- Dimensions 19.68" L x 8.67" W x 2.80" H