XV412D2

The XV412D2 is a 12-inch subwoofer rated 3000W RMS and 6000W peak, built around Xv4 voice coils for systems where real power is the requirement. Excursion is rated at 30mm Xmax, and a high-efficiency motor structure with a strong BL factor of 22.25 keeps cone movement under control at those power levels.

A heavy-duty motor and optimized cooling keep performance consistent through extended play rather than fading as the coil heats up. The precision-engineered cone and suspension hold distortion low at maximum output, and the reinforced cone stands up to the pressure a 3000W woofer generates inside a sealed vehicle.

This one is meant for a ported enclosure: 2.5 cu ft with 40 sq in of port area tuned to 32Hz gets the response it was designed around. Fourth-order figures are published as a 1.0 cu ft sealed side with a 3.0 cu ft ported side and 60 sq in of port area. Mounting depth is 11.75" with an 11.09" cutout, and displacement is 0.23 cu ft, so measure your space before committing to a design.

Dual 2-ohm coils wire to a 1-ohm or 4-ohm load. Between the power handling and the enclosure requirements, it suits a daily system upgrade with an amplifier to match or a full SPL build where output is the goal.