VMA1240 + (5) Pair WET-7020B

The VMA1240 mixer amplifier and ten WET-7020B wall speakers give restaurants, bars, retail stores, gyms, offices, and patios a complete 70V sound system for background music and announcements, with the amp and every speaker you need in one order. The VMA1240 delivers 240W through a single output that runs at 70V, 100V, or 4/8 ohm, and its five-input mixer takes mics, line sources, RCA, USB drives, and Bluetooth streaming. Voice-activated ducking automatically lowers the music when someone speaks into the mic, so paging cuts through without anyone reaching for a volume knob.

Each WET-7020B pairs a 5.25" polypropylene woofer with a 13mm PEI tweeter in a sealed cabinet tuned for balanced sound from 60Hz to 20kHz. The tap switch on every speaker offers 20W, 15W, 10W, 5W, and 2.5W, so you can set the bar area loud, the dining room moderate, and the hallway low on the same run. Tapping all ten at 20W totals 200W, leaving about 17% headroom on the amp, right in line with the 15 to 20% buffer recommended for 70V systems.

The speakers are IPX55 rated with waterproof ABS cabinets, rustproof aluminum grilles, and powder coated steel brackets that pass a 96 hour salt water spray test, so the same model works on a covered patio, a pool deck, or an indoor dining room. A 4-way swivel bracket angles each one up, down, left, or right to aim sound at seating areas. On the amp side, per-channel bass and treble, a front-panel display, Euroblock, RCA, and 1/4" inputs, 27V phantom power for condenser mics, and an included rack mount kit make for a clean install in an equipment closet or behind the bar.