Hifonics ZD-3350.1D 3350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp
HIFONICS
Hifonics ZD-3350.1D 3350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp
Hifonics ZD-3350.1D 3350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp
Class-D Mono Car Amplifier, 3350W Max, 1-Ohm Stable, 2 AWG Terminals, Bass Remote Included
Free Shipping
Features
- 3350W max power with 1 x 3350W at 1 ohm for multi-woofer systems
- 2 AWG power and ground terminals support high current draw
- Variable 50Hz-250Hz low-pass and 15Hz-40Hz subsonic filter
- Wired bass remote included for level control at the dash
- Aluminum heat sink handles thermal load during long high-output sessions
Couldn't load pickup availability
What's Included in the box
- ZD-3350.1D Class-D Mono Amplifier
- Wired Bass Remote Control
SKU: SKU: ZD-3350.1D U
View full details





Product Description
At this output the electrical side matters. Power and ground terminals take 2 AWG cable, external 175A fusing is required, and the vehicle should have charging system and battery capacity to match. A PWM MOSFET power supply with the dual coil Simpatico design keeps voltage constant through the output devices so the amp holds output under long, heavy bass passages.
Tuning stays onboard: a variable low-pass crossover from 50Hz to 250Hz at 12dB per octave, a 15Hz to 40Hz subsonic filter to control excursion below box tuning, and 0 to 12dB bass boost. Input sensitivity runs 0.2V to 6V, speaker-level inputs allow a factory head unit tie-in, and THD stays under 0.1%.
The chassis measures 16.77 x 5.75 x 2.16 in and weighs 8.38 lb, with an aluminum heat sink handling thermal load. The included wired bass remote puts level control at the dash, DC Signal Sense starts the amplifier from RCA signal, nickel-plated RCA jacks resist corrosion, and end-panel LEDs report overload and speaker short conditions during setup and daily use.
Features
-
Built For Multi-Woofer Systems
3350W at 1 ohm and 1675W at 2 ohms cover a pair of 15s or a small sub wall, with headroom left before the amplifier reaches its limit.
-
Current Delivery Done Right
2 AWG power and ground terminals with 175A external fusing move the current this output demands, provided the charging system is up to the job.
-
Voltage Holds Under Pressure
A PWM MOSFET supply with dual coil design keeps voltage constant across the output devices during long, heavy bass passages at high volume.
-
Precise Low-End Tuning
A variable 50Hz-250Hz low-pass, a 15Hz-40Hz subsonic filter, and 0-12dB of bass boost keep woofer excursion under control below the tuning frequency of the box.
-
Thermal Management
A full-length aluminum heat sink across the 16.77 in chassis moves heat away from the output stage so output stays consistent set after set.
Technical Specifications
- Product Type Class-D Mono Car Amplifier
- Amp Class Class D
- Total Channels 1
- Max Power 3350W
- Power @ 1 Ohm 1 x 3350W
- Power @ 2 Ohms 1 x 1675W
- Power @ 4 Ohms 1 x 850W
- Variable Low Pass Crossover 50Hz-250Hz, 12dB Per Octave
- Bass Boost 0-12dB
- Subsonic Filter 15Hz-40Hz
- Input Voltage Range 0.2-6V
- Frequency Response 15Hz-250Hz
- Total Harmonic Distortion < 0.1%
- Speaker Level Inputs Yes
- Bass Remote Included
- Power / Ground Terminal 2 AWG
- Speaker Terminal 12 AWG
- Fusing External 175A
- Vehicle Fitment Universal
- Color Black
- Weight 8.38 lb
- Dimensions 16.77 x 5.75 x 2.16 in