(2) JRX212 + RPM1470 + RVSS2-TSNL4

This package gives DJs, bands, churches, and event hosts a complete PA system built around two JBL JRX212 12" two-way speakers and a Rockville RPM1470 14-channel powered mixer. The RPM1470's built-in amplifier puts out 500W RMS per side into 8 ohms, right at the top of the JRX212's recommended 250W to 500W range, so the speakers get full power without a separate amp rack. A pair of steel tripod stands and two 20' 1/4" to Speakon cables finish the setup, so everything for the gig arrives in one order.

Each JRX212 pairs a JBL M112-8 12" woofer with a JBL 2414H-C 1" compression driver on a Progressive Transition waveguide, covering 60 Hz to 20 kHz with up to 128 dB maximum SPL. SonicGuard protects the high-frequency driver from excess power without cutting out mid-show, and the dual-angle pole socket tilts each cabinet 10° toward the crowd. Off the stands, each cabinet works as a floor wedge monitor.

With 14 channels and 14 low-noise XDR2 mic preamps, the RPM1470 has room for a full band, a panel of speakers, or a karaoke night with several singers. Switchable +48V phantom power runs condenser mics, each channel gets a 4-band EQ plus pad, mute, and solo buttons, and a dual 7-band graphic EQ tunes the main and monitor outputs to the room. Sixteen 24-bit digital effects add reverb, delay, and chorus, while aux sends and returns on every channel connect outboard processors. Bluetooth, USB, and SD cover music between sets, and you can record the main mix straight to USB or SD card. The stands hold up to 132 lb each and pack into the included carry bag, making this rig a fit for weddings, church services, school events, and live gigs.