(2) JRX212 + RPM870 + RVSS2-TSNL4

This package puts a full PA system in one order: two JBL JRX212 12" two-way passive speakers, a Rockville RPM870 8-channel powered mixer, a pair of RVSS2 steel tripod stands, and two 20' 1/4" to Speakon cables. The mixer's built-in amplifier delivers 500W x 2 RMS at 8 ohms, right inside the JRX212's recommended 250W to 500W range, so the speakers and amp are matched from the start and you skip the guesswork of pairing a separate power amp.

On the front end, the RPM870 gives bands, DJs, churches, and event hosts six XDR2 low-noise mic preamps with switchable +48V phantom power for condenser mics, plus a stereo channel for keyboards or a playback source. Every channel has a 4-band EQ, aux send, FX control, pan, pad, mute, and solo, and a dual 7-band graphic EQ tunes the main and monitor outputs to the room. A 24-bit processor with 16 preset effects adds reverb, delay, chorus, and more, while Bluetooth streaming and a USB port handle background music and let you record the main mix straight to a USB stick.

Each JRX212 pairs a JBL M112-8 12" woofer with a JBL 2414H-C 1" compression driver on a Progressive Transition waveguide, covering 60 Hz to 20 kHz with up to 128 dB maximum SPL across a 90° x 50° pattern. SonicGuard protects the high-frequency driver from excess power without cutting the sound mid-set. The 3/4" MDF cabinets, all-steel handles, and powder-coated steel grilles hold up to regular load-ins, and the wedge shape doubles as a floor monitor when the band needs one. The RVSS2 stands hold up to 132 lb each and pack into the included carry bag, ready for weddings, school dances, church services, and club gigs.