Skip to product information
1 of 12

ALPINE

KTA-30MW 600 Watt Mono Amplifier+Amp Kit For RZR/ATV/UTV/Cart

KTA-30MW 600 Watt Mono Amplifier+Amp Kit For RZR/ATV/UTV/Cart

600W Mono Class D Amplifier, IP66 Weatherproof, With 8-Gauge Amp Wiring Kit

Free Shipping

Regular price $419.95
Sale price $419.95 Regular price $469.99
Save 10%
Shipping calculated at checkout.
Features
    • 600W Class D mono amplifier with Dynamic Peak Power for deep bass
    • IP66 weatherproof design withstands dust and high-pressure water spray
    • Compact 9-3/16" x 1-5/8" x 3-3/4" chassis fits tight UTV spaces
    • 8-gauge OFC wiring kit supplies clean power straight from the battery
    • Includes a 60A AGU fuse and mesh-wrapped cables for chemical resistance
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Alpine KTA-30MW 600W Mono Class D Amplifier
    • OEM-Grade Tyco 26-Pin Connector with Pigtail Wire Harness
    • 6 ft 8 AWG OFC Red Power Cable
    • 6 ft 8 AWG OFC Black Ground Cable
    • (2) 4 ft 16 AWG OFC Speaker Cables
    • 6 ft Pre-Terminated Ring Terminal Battery Cable
    • 6 ft 18 AWG Pre-Terminated REM Wire
    • AGU Fuse Holder with Waterproof Ring
    • 60A AGU Fuse
    • (2) Ring Terminals
    • (2) Spade Terminals
    • (4) Speaker Cable Terminals
    • (4) Washers
    • (10) Cable Ties
    • Hexagon Spanner

SKU: SKU: KTA-30MW+RWK8ATV

View full details

Product Description

This bundle pairs the Alpine KTA-30MW 600 watt mono amplifier with a Rockville RWK8ATV 8-gauge wiring kit, giving UTV, ATV, and side-by-side builds a complete subwoofer amplifier install in one purchase. The KTA-30MW uses Alpine's Dynamic Peak Power technology to push up to 600 watts to a subwoofer during demanding musical peaks, and its IP66 weatherproof rating lets it mount in exposed spots like a side-by-side dash, a boat console, or a motorcycle saddlebag. At roughly half the size of a typical amplifier, it tucks into spaces where larger units will not fit.

The included RWK8ATV kit supplies 6 feet of 8-gauge OFC power and ground cable wrapped in chemical-resistant mesh, along with two 16-gauge speaker cables, a pre-terminated remote wire, and a 60A AGU fuse holder, so the amplifier connects straight to the battery without sourcing extra wiring. Ring terminals, spade terminals, speaker cable terminals, washers, cable ties, and a hexagon spanner round out the kit, covering the hardware needed to mount and wire the amplifier in one pass. Together, the amplifier and wiring kit turn a bare UTV or ATV electrical setup into a finished subwoofer install ready for the trail.

Features

    • Powerful Bass In A Compact Amp

      Alpine's Dynamic Peak Power technology doubles output during demanding musical peaks, giving subwoofers in open-cab vehicles strong low end without a bulky amplifier.

    • Built For The Outdoors

      An IP66 rating protects the amplifier against dust and high-pressure water spray, so it holds up in side-by-sides, boats, and open-top vehicles.

    • Fits Where Larger Amps Cannot

      At roughly half the size of a typical amplifier, the KTA-30MW tucks under a dash, inside a glove box, or into a saddlebag with room to spare.

    • Clean Power From Battery To Amp

      The 8-gauge OFC wiring kit runs straight from the battery with mesh-wrapped cables that resist chemicals in the battery compartment.

    • Installation-Ready Hardware Included

      Pre-terminated ring terminals, a 60A AGU fuse holder, and speaker cable terminals mean every connection is ready to wire without extra parts to buy.

Technical Specifications

  • Product Type Mono Amplifier With Wiring Kit
  • Amplifier Power Output 300W RMS x 1, 600W Peak (2Ω/4Ω)
  • Amplifier Rating IP66 Weatherproof
  • Signal To Noise Ratio 83dB (ref. 1W into 4Ω)
  • THD Less than 0.1%
  • Crossover Variable Low Pass Filter 50-400Hz @ -24dB/Oct
  • Power Cable Gauge 8 AWG
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov