(2) HYDRO BEAM X1 LED Moving Head Lights+Controller+Stands+Cables
AMERICAN DJ
(2) HYDRO BEAM X1 LED Moving Head Lights+Controller+Stands+Cables
(2) HYDRO BEAM X1 LED Moving Head Lights+Controller+Stands+Cables
100W IP65 Moving Head Beams, 384-Ch Wireless DMX Controller, Totem Stands, Cables
Features
- Two 100W IP65 moving head beams with 3-degree output and wireless DMX
- 384-channel wireless DMX controller with built-in transmitter
- Two white totem stands adjustable to 68.8" with 132 lb capacity
- Two 5-foot 5-pin OFC copper DMX cables at 120-ohm impedance
- Black and white scrims with carry bags for each totem stand
Couldn't load pickup availability
What's Included in the box
- (2) ADJ Hydro Beam X1 100W IP65 Moving Head Beam Light
- (2) Omega Brackets
- (2) 16-Facet Prism
- (2) Frost Filter
- (1) Rockville ROCKFORCE W4 384-Channel Wireless DMX Controller
- (1) USB LED Gooseneck Light
- (1) Power Adapter (DC 9-12V)
- (1) Wireless Transmitter Antenna
- (2) Rockville RTP32W Totem Stand
- (2) White Scrim
- (2) Black Scrim
- (2) Bag for Frame, Base, and Support Legs
- (2) Bag for Top Plate and Base Plate
- (2) 35mm Pole Mount Adaptor
- (2) Non-Slip Foam EVA Pads
- (2) 8mm Thumb Bolt and Washer Pack
- (2) Rockville RDX5M5 5' 5-Pin DMX Cable
SKU: SKU: (2) HYDRO BEAM X1+ROCKFORCE W4+RTP32W-1
View full details











Product Description
The ROCKFORCE W4 controller handles 384 DMX channels across 24 fixtures of 16 channels each, with a built-in wireless DMX transmitter that pairs directly with the Hydro Beam X1's wireless receivers. Thirty banks of 8 programmable scenes, 6 chases of 240 scenes, and MIDI control give you show-level programming capability. The two RTP32W totem stands adjust from 39 to 68.8 inches with flat steel base plates, black and white scrims, and dedicated carry bags. Two 5-foot 5-pin DMX cables connect the controller to any wired fixtures in the chain. This is a go-to rig for DJs, event producers, and houses of worship that want dramatic beam effects on mobile totem stands with wireless control.
Features
Wireless Beam Control
The ROCKFORCE W4 controller transmits DMX wirelessly to the Hydro Beam X1 built-in receivers from up to 1,968 feet away, eliminating data cables between the console and fixtures.
IP65 Weatherproofing
Sealed housings with rubber-covered connections protect both beam fixtures from dust, sand, rain, and moisture, keeping the rig running at outdoor festivals and exposed stages.
Stable Totem Mounting
Flat steel base plates on each RTP32W stand make full floor contact for a stable foundation up to 68.8 inches, outperforming tripod designs that wobble on uneven ground.
Show-Level Programming
384 channels across 30 banks of scenes and 6 programmable chases give you the depth to build multi-cue light shows that sync to music via the built-in microphone or MIDI.
Matched White Aesthetic
White totem stands with interchangeable black and white scrims match the event style, letting you set up a clean, coordinated look for weddings, churches, and corporate events.
Technical Specifications
- Product Type Moving Head Beam, Controller, and Totem Stand Bundle
- Beam Lamp 100W Osram Sirius HRI Discharge (6,000 hr)
- Beam Angle 3 degrees
- Beam Protection IP65
- Beam Wireless DMX WiFLY EXR
- Beam Weight 36 lb each
- Controller DMX Channels 384
- Controller Fixtures Up to 24 (16 ch each)
- Controller Wireless Range 1,968'
- Controller Scenes 30 banks x 8 scenes
- Totem Height Range 39" to 68.8"
- Totem Capacity 132 lb each
- Totem Weight 37 lb each
- DMX Cable Length 5' each
- DMX Cable Impedance 120 Ohm