DOTZ PAR 100

The Dotz Par 100 is a 100W COB LED par can built for wash lighting on stages, dance floors, clubs, and church platforms. A single 100W RGB tri COB engine mixes color on one board, so the wash lands as blended color instead of separate red, green, and blue shadows on a backdrop. Out of the box the beam covers 80 degrees for broad coverage; the supplied lens kit narrows it to 25 degrees when you need reach, pushing 2521 lux at 2 meters. Four DMX channel modes (3, 4, 5, and 9 channel) run from simple color control up to full feature programming, and 32 built-in color macros plus preset programs cover nights without a console. Electronic dimming spans 0 to 100 percent with five dim curves for stage, TV, architectural, and theatre work, and flicker-free operation keeps it clean on camera. Strobe and pulse effects are built in. Five operating modes cover auto run, sound active, color macro, dimmer, and DMX, and the fixture also responds to the ADJ Par RF wireless remote when a controller is not practical. A 3-pin XLR chains data, IEC in/out daisy-chains up to nine fixtures at 110V, and a single yoke handles hanging or floor placement at 5 lb.