Encore FR Pro Color [Used]

The Encore FR Pro Color is a 400W Fresnel fixture built around a 7-inch lens and a 6-in-1 LED engine combining red, green, blue, amber, lime, and cyan elements. That six-color mix delivers CMY color mixing modes and tunable white from 2,400K to 8,500K with a CRI of 94+, making it equally useful as a key light, fill light, or backlight on stage and in broadcast settings. Motorized zoom adjusts the beam from 9 to 37 degrees, so you can tighten to a spot or open to a soft-edged wash without touching the fixture.

The fixture pushes over 11,000 lumens total, with 23,179 LUX at 2M when zoomed in. Five DMX channel modes (up to 19 channels), 6 dim curves, and adjustable refresh rates from 900 to 25,000Hz give lighting designers granular control over output behavior. RDM support, a USB service port, and a 4-button LCD control panel round out the on-board feature set. Locking power in and out lets you daisy chain fixtures on a single circuit: 2 units at 110V or 5 at 240V. The fixture ships with barn doors, a locking power cable, and two safety cables.