American DJ ADJ ENCORE FR150Z 130W LED DMX Fresnel Beam Spot Light w/Barn Doors

The ADJ Encore FR150Z is an 8-inch Fresnel fixture powered by a 130W LED engine, part of the Encore stage lighting series. It produces a wide, soft-edged white beam at 3000K with a CRI of 95, which is the look theater and stage work expects from a traditional Fresnel.

A manual zoom knob sets the beam angle anywhere from 15 to 38 degrees, so one fixture handles a tight special from a long throw or a broad wash from close in. Included barn doors shape the beam further, cropping light off drapes, cycs and camera lines. Dimming runs 0-100% for cues that need a slow fade rather than a hard snap.

Rigging and control are built for repertory and touring use. A four-button LCD operational menu handles addressing and settings at the fixture. Both 3-pin and 5-pin DMX in and out sockets are on board, along with locking power in and out so several fixtures daisy chain from one circuit. RDM support lets a console read and change fixture settings remotely, which saves ladder trips on a hung rig.

The housing is extruded aluminum, and multi-voltage operation covers AC 100-240V at 50/60Hz for touring across regions. The fixture measures 14.75" x 11.75" x 11.5", weighs 16 lb and is cETLus approved.