American DJ FOG FURY JETT PRO Wireless DMX Fogger Fog Machine w/ RGBA LED Lights

The Fog Fury Jett Pro is a high-output vertical fog machine with LEDs built into the head and WiFLY EXR wireless DMX onboard. It produces a CO2-style column without the tanks, regulators and refills that come with real cryo.

A 1,450W heater pushes 40,000 cubic feet per minute, throwing a dry, even blast up to 40 feet (12 meters). Twenty-eight 3W LEDs (6 red, 7 green, 6 blue, 3 amber and 6 UV) color the plume from inside, and the UV emitters add a look most foggers cannot produce. Heat-up takes 9 minutes and reheating between intervals runs about 80 seconds, held steady by ADJ Electronic Thermo Sensing. The heating element uses an oil-type transmission pipeline to reduce clogging, and an Italian pump keeps output consistent.

The machine operates in multiple positions. The 2.5-liter removable tank mounts front or rear, so the unit can point up from the deck or down from truss. Control runs through onboard settings, 3-pin DMX in/out, the included wireless remote, or WiFLY EXR wireless DMX with a range up to 2,500 ft (760M) line of sight, which covers any room you are likely to work in. DMX channel modes cover 1, 2, 3, 7 and 9.

A safety cable eye bolt secures the unit when flown, and the fixture is ETL approved. At 21 lb it handles like production gear rather than a fixed install. For a CO2-style effect, pair it with F4L QD quick-dissipating fog fluid.