Home / Bundles /

MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel

Product Description Specifications

MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel

  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
  • MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel
1 9
Used

AMERICAN DJ

MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel

MDF3 15W 3-in-1 RGB LED DMX Magnetic Single Dance Floor Panel

15W RGB LED DMX Dance Floor Panel, 23.62" Square, RDM Support

Free Shipping

$274.00
$274.00 $399.95
Save 31%
Shipping calculated at checkout.
Features
    • 3-in-1 RGB LEDs glow across the panel's opaque surface
    • Gold-plated copper connections improve reliability between panels
    • RDM support allows remote fixture addressing
    • Onboard battery allows pre-event DMX setup without power
    • Rated to bear up to 300 kg per square meter
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • MDF3 dance floor panel

SKU: MDF3*

View full details

Product Description

The ADJ MDF3 is a single, modular LED dance floor panel that builds on the original MDF2 design with an upgraded housing and improved power connections. Vibrant 3-in-1 RGB LEDs light the panel's opaque surface in a wide range of colors, and gold-plated copper strips and springs beneath the panel give adjacent units a more reliable electrical connection than a standard plug-together joint.

At 23.62 inches square and 2.76 inches tall, the MDF3 weighs 26.57 lb yet is rated to bear up to 300 kg per square meter, enough for a full dance floor of guests. A convenient service panel makes maintenance easier without disassembling the whole unit, and an upgraded PCB adds RDM support for remote fixture addressing along with an onboard battery that lets DMX addressing and mode selection happen before the panels are even powered on.

The MDF3 pairs with the same family of power supplies as other MDF panels, ranging from a compact 9-panel setup up to a 156-panel installation, along with edge and corner ramps for safely deploying panels at parties and events.

Features

    • Reliable Panel-to-Panel Connections

      Gold-plated copper strips and springs beneath each panel give a more dependable electrical connection than a standard plug joint.

    • Set Up Before Power Is On

      An onboard battery lets a technician configure a panel's DMX mode and settings before it's even plugged into the power chain.

    • Remote Addressing Made Easy

      RDM support built into the upgraded PCB lets a technician set fixture addresses remotely instead of walking to each panel.

    • Built To Hold A Crowd

      A bearing weight of up to 300 kg per square meter keeps the floor solid under a packed room of dancers.

    • Easier Maintenance

      A dedicated service panel gives access for repairs without pulling the whole unit apart.

Technical Specifications

  • Product Type Magnetic LED Dance Floor Panel
  • Light Source 3-in-1 RGB LED
  • Input Voltage DC 24V
  • Max Power Consumption 15W
  • Input Signal DMX512 (3-Pin XLR)
  • DMX Channel Modes 3, 5, 7, and 10 Channel
  • Visual Angle 160°
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov