Saber Spot RGBL

The Saber Spot RGBL is an LED pinspot with a 20W RGBL source: red, green, blue, and lime. The lime emitter fills in where standard RGB mixing falls short, which produces cleaner pastels and more accurate whites. An ACL lens focuses output into a tight 5.7-degree beam, and that narrow angle is the whole point: spotting a cake table, a centerpiece, a product display, or a mirror ball, and cutting visible mid-air beams through haze.

Color options run deep. There are 63 built-in color macros, 13 color changing programs, and white presets from 2000K to 9900K. Twelve DMX channel modes span 3-channel HSI up to 13-channel RGBL, including an 8-channel 16-bit mode, so the fixture fits a basic console or a detailed cue stack. RDM is supported and electronic dimming covers 0 to 100%.

The included lens kit swaps the beam to 10 or 45 degrees when a job calls for coverage instead of a pencil beam. Indoor power locking in and thru allow up to 57 fixtures at 120V on one run, and 5-pin DMX in and out pigtails sit at the back next to the 4-button display.

LED life expectancy is 30,000 hours. The scissor yoke hangs on truss or stands on the floor. Black housing, 6.69" x 5.31" x 8.46", 3.2 lb, IP20.