SABER SPOT WW

The Saber Spot WW is a compact pinspot with a 15W warm white LED and a built-in ACL lens that produces a razor sharp 4-degree beam. That narrow angle is the point: it puts a clean pool of light on a cake, a centerpiece, a piece of art, or a mirror ball without spilling onto the surrounding walls and floor.

Two frost filter lenses are included, at 10 and 45 degrees, with an O-ring to hold them in place, so the same fixture widens into an accent wash when a room calls for it. Output is flicker free at a 3.6KHz refresh rate for video work, and electronic dimming runs 0 to 100% in either of two DMX channel modes, set from the 4-button digital display on the rear panel. RDM is supported.

Power in and out use locking connections and DMX runs on 3-pin in and out pigtails, so a row of fixtures chains from a single drop. The scissor bracket hangs it from truss or sets it on the ground aimed upward.

At 2.6 lb and 3.5" x 6.75" x 3.5" it disappears into a room: reception table spotting, retail displays, gallery and museum lighting, and performance stages. A locking power cord is included. ETL approved, UL, CE. IP20, dry locations only.