American DJ ADJ SIP1PCIA IP65 Outdoor 1 Foot 12 AWG Locking Power Cable Adapter

The SIP1PCIA bridges two generations of locking power connectors. One end takes an IP65-rated locking power connector, the other is a standard locking power input connector, so IP65 cables and extensions can feed gear already wired for standard locking connectors.

This is the adapter that keeps existing inventory in service. Crews and rental houses adding IP65 fixtures rarely replace every cable and extension at once, and a short adapter closes the gap between the two connector types instead of leaving good cable in the case.

At 1' / 0.3 m end to end, it adds almost no bulk at the connection point and coils flat with the rest of your accessories. The 12 AWG conductor is rated for 20A at 120VAC and 16A at 250VAC, enough current for a full daisy-chained run of LED fixtures rather than a single unit. UL recognized components and a durable molded body hold up to nightly load-in and load-out handling.

Note the rating: the adapter itself is IP20, since one end is a standard connector. A fully sealed IP65 connection requires IP65 connectors on both mating halves, so use this adapter where the joint stays dry.