SIP1PCOA IP65 Outdoor 1 Foot 12 AWG Locking Power Cable Adapter

The SIP1PCOA is a 1-foot, 12AWG adapter that converts a standard locking power connector into an IP65 locking power output. It's the companion piece to bringing power out of an IP65 system and back into standard locking cable, so crews with an existing inventory of standard extensions don't need to swap every cable on a rig just to pick up power from IP65-rated equipment. The 12AWG conductor supports 20A at 120VAC or 16A at 250VAC, which covers par cans, movers, and most small to mid-size lighting loads. UL recognized components sit behind the connector, and the locking mechanism on the IP65 end keeps the joint secure through the vibration and handling of a typical load-in. At 1 foot end to end, the adapter barely adds length to a cable run, so it drops into place without reworking how power is distributed on site. This is the kind of hardware that shows up in a road case specifically because rigs rarely use one cable standard end to end: a job might supply IP65 distribution but the fixtures on hand only have standard locking inputs, and this adapter closes that gap in seconds instead of requiring a cable swap mid-show.