SPLC6 6' Locking Power Connector Link Cable

The SPLC6 is a 6' locking power link cable with a PowerCON connector on each end, built to daisy-chain power between fixtures that support locking power in and out. Instead of running a separate power line to every fixture on a truss or stage, you plug this cable between one fixture's power output and the next fixture's power input, letting a single circuit feed a whole run of lights. The locking connectors twist and secure in place, so the connection stays put through the vibration and handling of a normal load-in and show, unlike a standard edison plug that can work itself loose. At 6' end to end, this length is sized for linking adjacent fixtures on a truss or in a lighting rig without excess slack to manage. Because it uses the same PowerCON connector on both ends, it only works between fixtures that share that locking power standard, so it's a companion piece to ADJ, Accu-Cable, and other PowerCON-equipped gear rather than a general-purpose extension. For anyone setting up a multi-fixture par can or wash light rig, a link cable like this keeps the number of wall outlets and power runs down while keeping every connection secure.