STRYKER SPOT

The Eliminator Lighting Stryker Spot is a moving head spot for crisp pattern projection and aerial effects. A 150W cool white LED engine rated at roughly 50,000 hours powers the fixture, with output channeled through high quality optics and out of a 60mm glass front lens.

Two independent gobo wheels do the heavy lifting: eight fixed static gobos plus open on one, six replaceable rotating gobos plus open on the other. Replaceable gobos matter for corporate and wedding work, where a logo or monogram is the whole point. A separate 7-slot color wheel adds dichroic colors plus open white, and two rotating prisms, a 6-facet circular and a 5-facet linear, both bi-directional, multiply patterns into layered mid-air effects.

Motorized zoom gives a variable 9 to 14 degree beam and motorized focus keeps projections sharp at different throw distances, from a low bar ceiling to a tall stage truss. Dimming runs 0-100% with a variable strobe from 1Hz to 20Hz. Pan reaches 540 degrees and tilt 210 degrees, with 16-bit fine control on both for precise positioning.

Built-in programs plus a primary/secondary mode run a multi-fixture show with no external controller, and full DMX control in 16 or 18 channel modes covers integration into a larger system. RDM support sets the DMX start channel remotely, and an OLED display with four buttons handles local setup.

At 19 lb it fits mobile event work as readily as installs in bars, clubs, and entertainment venues.