UBL12H IP20 12x20W RGBAL LED DMX Wash Bar + DMX Cable

This bundle pairs the UBL12H wash bar with a Rockville RDX5M25 25-foot, 5-pin DMX cable, so the fixture arrives with the cable needed to actually link it into a DMX rig. The UBL12H itself is a 1-meter linear wash fixture with twelve 20-Watt HEX LEDs delivering over 90 CRI and tunable white light from 2,300K to 9,900K, controlled through an OLED display with seven DMX channel modes and five operational modes. Its magnetic end alignment lets multiple bars click together for a gapless wash, and indoor locking power daisy-chains up to 17 units at 120V. The RDX5M25 fills the gap most buyers hit next: a true 120-ohm DMX cable to connect the fixture to a controller or the next fixture in the chain. Built with nickel-plated, oxygen-free copper conductors and a high-density braided shield, it's rated for proper DMX signal transfer rather than repurposed microphone cable, which has the wrong impedance and capacitance for clean DMX data. At 25 feet, it's long enough to reach from a controller position to a fixture on a truss or stage without adding a second cable. Buying the wash bar and a correctly rated DMX cable together means the fixture is ready to run on arrival instead of waiting on a separate cable order.