Audio Technica AT875R Short Shotgun Condenser Microphone w/ Line+Gradient DV Mic
Audio Technica AT875R Short Shotgun Condenser Microphone w/ Line+Gradient DV Mic
AUDIO TECHNICA
Audio Technica AT875R Short Shotgun Condenser Microphone w/ Line+Gradient DV Mic
Audio Technica AT875R Short Shotgun Condenser Microphone w/ Line+Gradient DV Mic
Short Shotgun Condenser Microphone, 6.89 in. Long, Includes Stand Clamp, Thread Adapter, Windscreen, Pouch
Free Shipping
Features
- Under 7 inches long, so it stays out of frame on compact cameras
- Line + gradient design gives a narrow acceptance angle for distant pickup
- Strong rejection of sound from the sides and rear of the microphone
- Response tailored to reduce camera and handling noise below 90 Hz
- Includes AT8405a stand clamp, thread adapter, windscreen, and soft pouch
Couldn't load pickup availability
What's Included in the box
- AT875R Short Shotgun Condenser Microphone
- AT8405a Stand Clamp for 5/8"-27 Threaded Stands
- 5/8"-27 to 3/8"-16 Threaded Adapter
- Windscreen
- Soft Protective Pouch
SKU: SKU: AT875R
View full details





Product Description
Line + gradient design gives it a narrow acceptance angle. Pointed at a subject from several feet away, it picks up dialogue while rejecting sound arriving from the sides and rear, which is what separates usable location audio from a recording full of traffic, crew movement, and room reflection.
On-axis response is natural rather than colored, so dialogue does not need heavy correction in post. Response runs 90-20,000 Hz, deliberately rolling off below 90 Hz to reduce handling and camera noise that would otherwise sit under every take.
Maximum input is 127 dB SPL with a 107 dB dynamic range and 100 ohm impedance. It runs on 11-52V DC phantom power only, supplied by a camera, field recorder, or mixer.
At 2.8 oz it works on a camera shoe mount, a boom pole for interviews, or a stand for voiceover. The included AT8405a clamp fits standard threaded stands, with a thread adapter, plus a windscreen and soft pouch.
Features
-
Short Enough to Stay Hidden
At 6.89 inches long and 2.8 oz, the mic mounts on a compact camera or camcorder without adding heft or creeping into a wide shot.
-
Reach Across the Room
A narrow acceptance angle from the line + gradient design captures dialogue several feet away while leaving sound from the sides out of the take.
-
Cleaner Location Audio
Off-axis rejection keeps traffic, crew movement, and room reflection out of your recording, which is where most usable field audio is won or lost.
-
Less Noise From the Rig
Response tailored below 90 Hz reduces camera and handling noise, so low-frequency rumble does not sit under every line of dialogue.
-
Ready for Camera or Boom
The included stand clamp, thread adapter, windscreen, and pouch cover shoe mounting, boom pole work, and transport straight out of the box.
Technical Specifications
- Product Type Short Shotgun Condenser Microphone
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Line + gradient
- Frequency Response 90-20,000 Hz
- Open Circuit Sensitivity -30 dB (31.6 mV) re 1V at 1 Pa
- Impedance 100 ohms
- Maximum Input Sound Level 127 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range 107 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio 74 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 11-52V DC, 2 mA typical
- Switches On/off
- Output Connector Integral 3-pin XLRM-type
- Weight 2.8 oz (80 g)
- Dimensions 6.89 in. long, 0.83 in. diameter