Audio Technica ATW-1101/G System 10 Digital Wireless Guitar/Bass/Inst System

The ATW-1101/G cuts the cable between your guitar or bass and the amp. It pairs the ATW-R1100 receiver with an ATW-T1001 UniPak body-pack transmitter and the AT-GcW input cable, which runs from a 1/4" phone plug to a locking 4-pin connector over a 36" (0.9 m) run.

The system operates at 24-bit/48 kHz in the 2.4 GHz range, well clear of TV and DTV traffic that crowds UHF wireless. Setup takes seconds: power up, sync, and the digital ID display on both units confirms the pairing. Up to eight channels run together with no frequency coordination or group selection to work through.

Three layers of diversity keep the signal alive. Frequency diversity sends audio on two dynamically allocated frequencies. Time diversity spreads it across multiple time slots to resist multipath. Space diversity uses two antennas on both the transmitter and receiver. The result is stable audio across a typical 100 ft operating range with a 20 Hz to 20 kHz response.

The receiver offers balanced XLR and unbalanced 1/4" outputs with level control, so it feeds an amp, a DI, or a console directly. Two AA batteries run the transmitter more than 7 hours. It fits guitarists and bassists on stage, worship teams, and presenters using instrument sources.