Audio Technica PRO37 Small Diaphragm Cardioid Condenser Microphone PRO 37 Mic
Audio Technica PRO37 Small Diaphragm Cardioid Condenser Microphone PRO 37 Mic
AUDIO TECHNICA
Audio Technica PRO37 Small Diaphragm Cardioid Condenser Microphone PRO 37 Mic
Audio Technica PRO37 Small Diaphragm Cardioid Condenser Microphone PRO 37 Mic
Small-Diaphragm Cardioid Condenser Mic, 30-15,000 Hz, Includes Stand Clamp, Thread Adapter, Windscreen, Pouch
Free Shipping
Features
- Low-mass element tracks fast transients on acoustic sources
- 30 to 15,000 Hz response suits guitar, overheads, piano, and group vocals
- Handles up to 141 dB SPL at 1% THD for loud drum overhead work
- Low-profile body fits tight placements a larger mic cannot reach
- Gold-plated 3-pin XLRM-type connector resists corrosion
Couldn't load pickup availability
What's Included in the box
- PRO 37 cardioid condenser microphone
- AT8405a stand clamp for 5/8"-27 threaded stands
- 5/8"-27 to 3/8"-16 threaded adapter
- AT8159 windscreen
- Soft protective pouch
SKU: SKU: PRO37
View full details



Product Description
Frequency response runs 30 to 15,000 Hz, reaching low enough to hold the body of a guitar or a piano's lower register while keeping cymbals and string detail on top. The cardioid pattern rejects sound arriving from the sides and rear, tightening isolation when you have a singer and a guitar in the same room or a stage with monitors in front of the kit.
A slim, low-profile body places the capsule where a larger mic cannot go, such as under a hi-hat, inside a piano lid, or tight to a guitar's twelfth fret. Maximum input sits at 141 dB SPL at 1% THD, so it stays clean as an overhead over a hard-hitting drummer, and the 65 dB signal-to-noise ratio keeps quiet fingerpicking free of hiss.
Build quality matches the working life of a studio and a road case. A gold-plated 3-pin XLRM-type connector resists corrosion at the one point that fails first, and the housing is made to take repeated setup. The mic runs on 11-52V phantom power and ships with an AT8405a stand clamp, a 5/8"-27 to 3/8"-16 thread adapter, an AT8159 windscreen, and a soft protective pouch.
Features
-
Catches The Attack
A low-mass element reacts fast to transients, so pick attack on an acoustic guitar and stick definition on cymbals stay sharp instead of smearing.
-
Fits Where Bigger Mics Cannot
The low-profile body slides under a hi-hat, inside a piano lid, or tight to the twelfth fret, opening placements a large-diaphragm mic rules out.
-
Clean Under Heavy Hitting
A maximum input of 141 dB SPL at 1% THD keeps the mic composed as a drum overhead when the drummer digs in during a chorus.
-
Tighter Isolation In A Live Room
The cardioid pattern rejects sound from the sides and rear, keeping a vocal out of the guitar mic when both are tracked together.
-
Built For Repeated Setup
Rugged construction and a gold-plated XLRM-type connector resist the corrosion and wear that take mics out of rotation after a few seasons.
Technical Specifications
- Product Type Small-Diaphragm Cardioid Condenser Microphone
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 30 - 15,000 Hz
- Open Circuit Sensitivity -42 dB (7.9 mV) re 1V at 1 Pa
- Impedance 200 ohms
- Maximum Input Sound Level 141 dB SPL, 1 kHz at 1% THD
- Dynamic Range 112 dB typical, 1 kHz at max SPL
- Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 11-52V DC, 2 mA typical
- Output Connector Integral gold-plated 3-pin XLRM-type
- Weight 1.7 oz (49 g)
- Dimensions 3.9" long x 0.83" maximum body diameter