MM-3025.2D
AUTOTEK
MM-3025.2D
MM-3025.2D
Class D 2-Channel Car Amplifier, 3000W Max, Bridgeable, Onboard Crossovers, RCA Pass-Through Outputs
Free Shipping
Features
- 3000W maximum power from a compact Class D two-channel chassis
- 2 x 1500W at 2 ohms, 2 x 750W at 4 ohms, 1 x 3000W bridged at 4 ohms
- Variable 40Hz-400Hz high-pass and low-pass crossovers built in
- Full-range RCA pass-through outputs feed a second amplifier
- LED end-panel diagnostics indicate overload and speaker short protection
Couldn't load pickup availability
What's Included in the box
- Autotek MM-3025.2D 2-Channel Amplifier
SKU: SKU: MM-3025.2D
View full details




Product Description
Class D topology keeps the chassis compact relative to the output, so mounting under a seat or against a trunk wall stays realistic. PRO-FI High Speed MOSFETs and Twin Coil Isolation Design keep distortion low while the amp works at the top of its range, and the high energy PWM power supply moderates the load on the vehicle electrical system.
Variable 12dB per octave high-pass and low-pass crossovers each span 40Hz to 400Hz. Keep low frequencies out of door speakers in stereo mode, or set the low-pass and hand the amp full sub duty when bridged. Built-in bass control adjusts low-end level at the amplifier.
Full-range RCA pass-through outputs feed another amplifier without a second long cable run. Nickel-plated brass terminals with angled Allen key connectors keep power and speaker connections tight, and LED diagnostics report overload and speaker short protection from the end panel.
Features
-
Top Of The Compact Line
At 3000W maximum power with 2 x 1500W at 2 ohms, this two-channel amp supplies more output than most factory systems will ever call for.
-
One Amp, Two Jobs
Run it stereo for high-power component speakers, or bridge to 1 x 3000W at 4 ohms and put the whole amplifier behind a subwoofer.
-
Filters For Either Mode
Variable 12dB per octave high-pass and low-pass crossovers spanning 40Hz to 400Hz adapt the amplifier to speaker duty or subwoofer duty.
-
Signal For The Next Amp
Full-range RCA pass-through outputs send signal to a second amplifier, removing the need for another cable run down the length of the vehicle.
-
Connections Built To Last
Nickel-plated brass terminals with hex set screws resist corrosion, and angled Allen key connectors stay reachable with hand tools after the amp is mounted.
Technical Specifications
- Product Type Class D 2-Channel Car Amplifier
- Total Channels 2
- Max Power 3000 W
- Power @ 2 Ohms 2 x 1500 W
- Power @ 4 Ohms 2 x 750 W
- Mono Bridged @ 4 Ohms 1 x 3000 W
- Crossover Variable Electronic 12dB Per Octave
- Variable High Pass Crossover 40Hz-400Hz
- Variable Low Pass Crossover 40Hz-400Hz
- Tone Control Built-In Bass Control
- Variable Input Voltage 0.2-6 V
- Frequency Response 10Hz-22kHz
- Total Harmonic Distortion < 0.05%
- Speaker Level Inputs RCA
- Pre-Amp Outputs RCA
- Power Terminal 12v/GND 4 AWG
- Speaker Terminal 12 AWG
- Fusing External 80A
- Color Black
- Warranty 1 Year