Skip to product information
1 of 6

AUTOTEK

SM-3600.1D

SM-3600.1D

Class D Mono Car Amplifier, 3600W Max, 1/2/4-Ohm Stable, Adjustable Crossover, Wired Bass Remote

Free Shipping

Regular price $94.95
Sale price $94.95 Regular price $159.99
Save 40%
Shipping calculated at checkout.
Features
    • 3600W maximum power in a 1-ohm stable Class D mono amplifier
    • 1 x 3600W at 1 ohm, 1 x 1800W at 2 ohms, 1 x 900W at 4 ohms
    • Adjustable 40Hz-300Hz low-pass crossover and 10Hz-40Hz subsonic filter
    • Wired bass remote adjusts low-end level from the driver seat
    • QTD aluminum heat sink keeps output steady through long, hard sessions
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Autotek SM-3600.1D Mono Amplifier
    • Wired Bass Remote

SKU: SKU: SM-3600.1D

View full details

Product Description

The Autotek SM-3600.1D is the highest output monoblock in the Street Machine Class D line, rated at 3600W maximum power and stable down to 1 ohm. It delivers 1 x 3600W at 1 ohm, 1 x 1800W at 2 ohms, and 1 x 900W at 4 ohms, so it scales from a single subwoofer to a multi-sub build wired low.

A fully adjustable 12dB low-pass crossover covers 40Hz to 300Hz, a subsonic filter runs 10Hz to 40Hz, and bass boost adds up to 12dB. The included wired bass remote mounts where you can reach it, so you set the low end from the driver seat instead of the amplifier.

QTD Technology adds mass to the aluminum heat sink for quick thermal dispersion, which keeps output steady when the amp runs hard for long stretches. Pro-Fi High Speed MOSFETs hold efficiency high and distortion low, and a high energy Pulse Width Modulated power supply moderates the demand on the vehicle electrical system.

RCA inputs with a low noise preamplifier circuit keep the signal path clean, with greater than 100dB signal-to-noise and 10Hz to 300Hz frequency response matched to subwoofer duty. Nickel-plated brass terminals accept 4 GA power and 8 GA speaker wire through screw-down connectors, and LED indicators report overload and speaker short protection. An external 125A fuse covers the current this amplifier can pull.

Features

    • Built For Multi-Sub Systems

      Stable to 1 ohm with 1 x 3600W available, this monoblock supports multiple subwoofers wired low without running out of output.

    • Scales To Your Load

      1 x 1800W at 2 ohms and 1 x 900W at 4 ohms mean the same amplifier still fits a simpler single-sub setup.

    • Keep Power On Usable Bass

      The 10Hz-40Hz subsonic filter blocks frequencies below enclosure tuning, protecting cone travel and putting amplifier power into bass you can feel.

    • Low End Under Your Hand

      The included wired remote mounts within reach of the driver seat, letting you change bass level track by track without stopping.

    • Thermal Dispersion Under Load

      QTD Technology puts extra mass in the aluminum heat sink, holding temperatures down so the amplifier keeps performing during long high-output sessions.

Technical Specifications

  • Product Type Class D Mono Car Amplifier
  • Series Street Machine
  • Total Channels 1
  • Max Power 3600 W
  • Power @ 1 Ohm 1 x 3600 W
  • Power @ 2 Ohms 1 x 1800 W
  • Power @ 4 Ohms 1 x 900 W
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov