Home / Bundles /

CDi4000* [Open Box]

Product Description Specifications

CDi4000* [Open Box]

  • CDi4000* [Open Box]
  • CDi4000* [Open Box]
  • CDi4000* [Open Box]
  • CDi4000* [Open Box]
  • CDi4000* [Open Box]
  • CDi4000* [Open Box]
  • CDi4000* [Open Box]
1 7
Open Box

CROWN

CDi4000* [Open Box]

CDi4000* [Open Box]

2-Channel Commercial Amplifier, 1200W at 4 Ohms, 70V/140V Output, Onboard DSP
$1,468.00
$1,468.00 $1,845.00
Save 20%
Shipping calculated at checkout.
Features
    • Rated 1200W per channel at 4 ohms across 2, 4, and 8-ohm loads
    • 70V and 140V distributed line outputs for zoned installations
    • Onboard DSP with crossovers, EQ filters, delay, and output limiting
    • Up to 20 user-defined DSP presets for repeatable setups
    • Front-panel LCD screen for quick, on-site configuration
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Crown CDi4000 2-Channel Power Amplifier
    • IEC power cable

SKU: CDi4000*

View full details

Product Description

The Crown CDi4000 tops the CDi line at 1200W per channel at 4 ohms, while keeping the same 2, 4, or 8-ohm and 70V/140V flexibility as the smaller models in the series. That power ceiling suits large venues, houses of worship, and live sound applications that need serious headroom from a single 2-channel amplifier rather than stacking multiple smaller units.

A switch-mode universal power supply keeps the chassis usable across regional voltages, and the front-panel LCD screen shows channel levels, load settings, and DSP status for setup and service. Onboard digital signal processing handles crossovers, EQ filters, delay, and output limiting directly in the amp, with up to 20 user-defined DSP presets for saving tuned configurations across multiple jobs or rooms.

At 3.5" x 19" x 12.25" and 22 lb, it mounts into a standard equipment rack, and the 15A IEC power connector matches common rack power distribution setups.

Features

    • Top-Tier Power in the CDi Line

      1200W per channel at 4 ohms gives large venues and live sound rigs the headroom a smaller commercial amp can't reach.

    • Built for Mixed-Impedance Installs

      Switches between 2, 4, and 8-ohm loads and 70V/140V distributed lines so one amplifier covers zones with different speaker types.

    • Onboard Signal Processing

      Built-in crossovers, EQ filters, delay, and output limiting tune sound at the amp without adding external processors.

    • Fast Field Configuration

      A front-panel LCD screen shows channel status and settings so installers can adjust the system without a laptop.

    • Save Time on Repeat Jobs

      Up to 20 user-defined DSP presets store tuned configurations for quick recall across multiple rooms or venues.

Technical Specifications

  • Product Type 2-Channel Commercial Power Amplifier
  • Rated Power Output 1200W per channel at 4 ohms
  • Load Impedance 2, 4, 8 ohms; 70V/140V
  • Signal to Noise Ratio 100 dB (A-weighted)
  • THD Less than 0.5%
  • Damping Factor > 500 (20 Hz to 400 Hz)
  • Frequency Response +0 dB, -1 dB (20 Hz - 20 kHz at 1W)
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov