Skip to product information
1 of 8

CRUNCH

DR-1325.1

DR-1325.1

Mono Class A/B Amplifier, 1325W Max, 1 x 1325W At 2 Ohms, LED VU Meter, Bass Remote Included

Free Shipping

Regular price $71.00
Sale price $71.00 Regular price $109.99
Save 35%
Shipping calculated at checkout.
Features
    • 1325W max power with 1 x 1325W at 2 ohms mono output
    • Class A/B circuitry with THD under 0.5% and 100dB signal to noise
    • Variable 12dB low-pass crossover from 40Hz to 300Hz
    • Wired bass remote included for in-cabin level control
    • Selectable LED VU meter logo makes gain setting quick
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Crunch DR-1325.1 Mono Amplifier
    • Wired Bass Remote

SKU: SKU: DR-1325.1

View full details

Product Description

The Crunch DR-1325.1 is a mono subwoofer amplifier from the V-Drive series, rated at 1325W max power. It puts out 1 x 650W at 4 ohms and 1 x 1325W at 2 ohms, which lines up with a single dual voice coil sub or a pair of 4-ohm subs wired in parallel.

Class A/B topology is the reason to pick this one over the Class D models in the line. The circuit runs a high sound quality signal path with minimal distortion, and paired with Crunch SPEED-FET MOSFET output devices it stays clean at the top of its range. THD sits under 0.5% with signal to noise above 100dB, and frequency response spans 10Hz to 300Hz for subwoofer duty.

Tuning happens on the amp and from the driver seat. A variable low-pass crossover sweeps 40Hz to 300Hz at 12dB per octave, a subsonic filter runs 10Hz to 40Hz to keep the sub from pushing frequencies it cannot reproduce, and bass boost adds 0 to 12dB. The included wired bass remote mounts anywhere in the cabin so you can pull bass back for a podcast and bring it up again for music without reaching under a seat.

The built-in LED VU meter is more than a light show. Switch the logo to VU mode and it tracks audio level, which makes setting gain by eye far quicker. Full red, VU mode, and off are all selectable. A Pulse Width Modulated power supply keeps the load on the vehicle electrical system low, QTD aluminum heat sinking holds temperatures down, and external 60A fusing protects the run. At 8 x 5.83 x 2.2 in and 3.08 lb, it fits under a seat or behind a panel.

Features

    • Power Matched To One Sub

      1 x 650W at 4 ohms or 1 x 1325W at 2 ohms fits a single dual voice coil subwoofer or a parallel pair without over or under driving them.

    • Clean Class A/B Output

      The Class A/B signal path with SPEED-FET MOSFET devices holds THD under 0.5%, keeping bass tight instead of distorting as levels climb.

    • Bass Control From Your Seat

      The included wired bass remote mounts within reach, so you can lower output for calls and podcasts and raise it again for music.

    • Set Gain By Eye

      Switch the logo to VU meter mode and the LEDs track audio level, turning gain adjustment into a visual task instead of guesswork.

    • Filters That Protect The Sub

      A 40Hz-300Hz low-pass crossover plus a 10Hz-40Hz subsonic filter keep the woofer off frequencies it cannot reproduce, saving excursion and power.

Technical Specifications

  • Product Type Mono Car Amplifier
  • Amplifier Class Class A/B
  • Total Channels 1
  • Max Power 1325W
  • Power @ 2 Ohms 1 x 1325W
  • Power @ 4 Ohms 1 x 650W
  • Crossover Variable Electronic 12dB Per Octave
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov