Skip to product information
1 of 11

CRUNCH

DR-2725.1D

DR-2725.1D

Mono Class D Amplifier, 2725W Max, 1 x 2725W At 2 Ohms, LED VU Meter, Bass Remote Included

Free Shipping

Regular price $84.95
Sale price $84.95 Regular price $139.99
Save 39%
Shipping calculated at checkout.
Features
    • 2725W max power with 1 x 2725W at 2 ohms mono output
    • Drives a pair of subwoofers wired to a 2-ohm load
    • Variable 12dB low-pass crossover from 40Hz to 300Hz
    • Wired bass remote included for in-cabin level control
    • External 100A fusing and LED protection diagnostics on board
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Crunch DR-2725.1D Mono Amplifier
    • Wired Bass Remote

SKU: SKU: DR-2725.1D

View full details

Product Description

The Crunch DR-2725.1D is a mono Class D subwoofer amplifier rated at 2725W max power, delivering 1 x 1360W at 4 ohms and 1 x 2725W at 2 ohms. This is the amp for a pair of subwoofers wired to 2 ohms, or a single high-power sub that needs more than a mid-tier mono amp can give it.

Class D circuitry with SPEED-FET MOSFET output devices keeps the chassis at 8.43 x 5.83 x 2.2 in and 3.5 lb despite the output rating. QTD aluminum heat sinking adds mass to pull heat away, and a Pulse Width Modulated power supply keeps demand on the charging system manageable at sustained volume.

A variable 12dB per octave low-pass crossover sweeps 40Hz to 300Hz, and a 10Hz to 40Hz subsonic filter keeps the woofer from wasting excursion on frequencies below what the enclosure can support, which matters more as power goes up. Bass boost adds 0 to 12dB, and the included wired bass remote puts level control in the cabin.

The LED VU meter in the logo tracks audio level in VU mode for setting gain, runs constant red, or switches off. Signal to noise is above 100dB with THD under 0.5% across a 10Hz to 300Hz response. Nickel-plated brass screw-down terminals take 4 AWG power and ground plus 8 GA speaker wire, LED diagnostics flag overload and short conditions, and external 100A fusing protects the install.

Features

    • Power For A Pair Of Subs

      1 x 2725W at 2 ohms or 1 x 1360W at 4 ohms covers two subwoofers wired in parallel, or one sub that needs real current.

    • Compact For The Output

      Class D circuitry keeps the chassis to 8.43 inches and 3.5 lb, so a high-power mono amp still mounts on an enclosure or under a floor.

    • Protection At High Excursion

      A 10Hz-40Hz subsonic filter blocks frequencies the enclosure cannot support, which matters more as output climbs toward the amplifier limit.

    • Bass Control From Your Seat

      The included wired bass remote mounts anywhere in the cabin, so you set output by track or by mood without stopping the vehicle.

    • Set Gain By Eye

      VU meter mode turns the logo LEDs into a live level display, making gain matching quick and repeatable during install and tuning.

Technical Specifications

  • Product Type Mono Car Amplifier
  • Amplifier Class Class D
  • Total Channels 1
  • Max Power 2725W
  • Power @ 2 Ohms 1 x 2725W
  • Power @ 4 Ohms 1 x 1360W
  • Crossover Variable Electronic 12dB Per Octave
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov