DR-3725.1D
CRUNCH
DR-3725.1D
DR-3725.1D
Mono Class D Car Amplifier, 3725W Max Power, 1-Ohm Stable, LED VU Meter, Bass Remote Included
Free Shipping
Features
- 3725W max power with 1 x 3725W at a 1-ohm load
- 1-ohm stability supports multiple subwoofers on one amplifier
- Variable 12dB low-pass crossover from 40Hz to 300Hz
- Wired bass remote included for in-cabin level control
- External 150A fusing and LED protection diagnostics on board
Couldn't load pickup availability
What's Included in the box
- Crunch DR-3725.1D Mono Amplifier
- Wired Bass Remote
SKU: SKU: DR-3725.1D
View full details










Product Description
One-ohm stability is the reason to choose this amp. Wiring two dual voice coil subs to a 1-ohm final load is common in bigger builds, and most amplifiers either go into protection or cook themselves trying. Class D circuitry with SPEED-FET MOSFET output devices keeps efficiency high at that load, and the QTD aluminum heat sink carries extra mass to move heat away during sustained output. The chassis measures 10.79 x 5.83 x 2.2 in at 4.95 lb.
A variable 12dB per octave low-pass crossover sweeps 40Hz to 300Hz, a subsonic filter runs 10Hz to 40Hz to protect excursion, and bass boost adds up to 12dB. The included wired bass remote mounts in the cabin for level control on the move.
The LED VU meter tracks audio level in VU mode for gain setting, runs constant red, or switches off. Signal to noise sits above 100dB with THD under 0.5% across 10Hz to 300Hz. Nickel-plated brass screw-down terminals accept 4 AWG power and ground with 8 GA speaker wire, and external 150A fusing protects the run. Plan the power wire and charging system accordingly.
Features
-
Stable Down To One Ohm
Two dual voice coil subs wired to a 1-ohm final load pull 3725W here, a load that sends most mono amplifiers straight into protection.
-
Scales With Your Build
1 x 930W at 4 ohms, 1 x 1860W at 2 ohms, or 1 x 3725W at 1 ohm covers everything from one sub to a full wall.
-
Heat Under Control
Class D efficiency plus added mass in the QTD aluminum heat sink hold operating temperatures down during sustained high-output playback.
-
Protection At Extreme Excursion
A 10Hz-40Hz subsonic filter blocks frequencies below what the enclosure supports, which becomes critical at power levels this high.
-
Bass Control From Your Seat
The included wired bass remote mounts anywhere in the cabin, letting you set subwoofer level track by track without touching the amplifier.
Technical Specifications
- Product Type Mono Car Amplifier
- Amplifier Class Class D
- Total Channels 1
- Max Power 3725W
- Power @ 1 Ohm 1 x 3725W
- Power @ 2 Ohms 1 x 1860W
- Power @ 4 Ohms 1 x 930W
- Crossover Variable Electronic 12dB Per Octave
- Variable Low Pass Crossover 40Hz-300Hz
- Bass Boost 0-12dB
- Subsonic Filter 10Hz-40Hz
- Input Sensitivity 0.2-6V
- Signal To Noise >100dB
- Frequency Response 10Hz-300Hz
- Total Harmonic Distortion <0.5%
- Audio Inputs RCA
- Power Terminal 12V/GND 4 AWG
- Speaker Terminal Wire Gauge 8 GA
- Fusing External 150A
- Series V-Drive
- Color Black
- Compatible Vehicles Universal
- Weight 4.95 lb
- Dimensions 10.79 x 5.83 x 2.2 in