Skip to product information
1 of 10

CRUNCH

GP-1000.4

GP-1000.4

4-Channel Class A/B Car Amplifier, 1000W Max Power, 4 x 250W At 2 Ohms, High-Level Inputs, Bass Boost

Free Shipping

Regular price $77.95
Sale price $77.95 Regular price $165.00
Save 52%
Shipping calculated at checkout.
Features
    • 1000W max power with 4 x 250W at 2 ohms across four channels
    • Bridges to 2 x 500W at 4 ohms for subwoofer or rear fill
    • High-level inputs connect directly to factory head units
    • Four operation modes from stereo to dual bridged mono
    • Switchable bass boost at 0, +6 or +12dB
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Crunch GP-1000.4 4-Channel Amplifier

SKU: SKU: GP-1000.4

View full details

Product Description

The Crunch GP-1000.4 Ground Pounder is a four-channel Class A/B amplifier rated at 1000W max power, delivering 4 x 125W at 4 ohms, 4 x 250W at 2 ohms, and 2 x 500W bridged. That is enough clean power to run a complete four-speaker system, or a front stage with the rear pair bridged to a subwoofer.

Four operation modes cover four-channel stereo, dual stereo bridged, stereo plus bridged mono, and dual bridged mono, so the amp adapts as the system grows instead of forcing a layout on day one.

High-level inputs are the practical feature here. They connect to factory head units with no RCA outputs, which means a stock radio can stay in the dash while every speaker in the vehicle gets amplified power. RCA inputs are also on board for aftermarket sources, with input sensitivity adjusting from 0.2V to 9V.

Class A/B topology with SPEED-FET MOSFET output devices keeps the signal path clean at high output, and QTD aluminum heat sinking adds mass to hold temperatures down through long sessions. Variable electronic crossovers run 12dB per octave, built-in bass control adds switchable 0, +6, or +12dB, and frequency response spans 10Hz to 22kHz.

Nickel-plated brass screw-down terminals accept 4 AWG power and ground with 12 AWG speaker wire, LED diagnostics report overload and speaker short conditions, and 30A fusing protects the run. The chassis measures 10 x 8 x 2.375 in at 6.25 lb in black and red.

Features

    • Power For Every Speaker

      Four channels of 125W at 4 ohms replace weak head unit power in all four door and deck locations, adding output and control everywhere.

    • Keep The Factory Radio

      High-level inputs tie into OEM head units with no preamp outputs, so a stock dash and steering wheel controls stay exactly as they are.

    • Four Ways To Wire It

      Stereo, dual stereo bridged, stereo plus bridged mono, and dual bridged mono let the amplifier follow your system as it grows.

    • Clean Class A/B Output

      A high sound quality Class A/B circuit with SPEED-FET MOSFET devices keeps distortion low as the amplifier nears its rated output.

    • Cool Under Load

      QTD aluminum heat sinking carries extra mass to pull heat away, holding temperatures down through long listening at high volume.

Technical Specifications

  • Product Type 4-Channel Car Amplifier
  • Amplifier Class Class A/B
  • Total Channels 4
  • Max Power 1000W
  • Power @ 2 Ohms 4 x 250W
  • Power @ 4 Ohms 4 x 125W
  • Mono Bridged @ 4 Ohms 2 x 500W
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov