DBX VENUE360 VENU 360 DriveRack 3x6 PA Speaker Sound Processor System+APP

The DriveRack VENU360 takes the processing of the DriveRack 260 and adds a third input, six outputs, updated algorithms, and network control. It sits between your mixer and your amplifiers and handles the room: EQ, feedback suppression, crossover, compression, limiting, gating, subharmonic synthesis, and delay.

AutoEQ tunes automatically using sine sweeps rather than long broadcasts of pink noise, so a room can be measured and corrected in seconds. On the VENU360, AutoEQ lives in the output stage, which means separate parts of the system can each be tuned on their own: front of house, stage monitors, zone feeds, and tower delays all get their own correction instead of sharing one curve.

The updated AFS algorithm anticipates feedback and removes it before it builds, without changing the tone of the system. Wizards handle routing, level balancing, AutoEQ, and feedback suppression step by step, and a dedicated Monitor Wizard sets up and optimizes stage wedges. Built-in speaker tunings cover most major loudspeaker brands and stay current through updates.

Input processing includes dbx compression, AFS, a 31-band graphic EQ, a 12-band parametric EQ with narrow notch capability, subharmonic synthesis, backline delay, and a noise gate. Output processing adds a crossover supporting configurations up to mono 6-way, 12-band AutoEQ, compression, automatic gain control, 8-band parametric EQs for speaker tunings, limiting, driver alignment delays, and tower delays up to 1000 ms per output.

Connect over your local network from an Android, iOS, Mac, or Windows device and adjust everything from the floor, with a graphical interface that shows the whole signal chain.