Eliminator Dotz Tpar Sys Plus COB Wash Lights+Foot+Remote Controls+Stand+Bags

The Dotz TPar Sys Plus is a complete wash lighting system in one bag: four adjustable COB LED pars on a light bar, a lighting stand that reaches 9 feet, a foot controller, an RF remote, a stand bag, and a soft case for the rest of the system.

Each fixture uses a 30W tri-color COB (Chip On Board) LED. Because all three colors come from a single chip, colors mix without the color shadows that separate LED emitters throw onto a backdrop or a performer. Output measures 1345 LUX at 3 meters across a 90-degree beam, and a 25-degree lens kit is included when you need a tighter throw. LEDs are rated at roughly 50,000 hours, and a 3.6kHz refresh rate keeps the fixtures flicker-free on camera.

Control scales with the operator. Sound active and auto run modes cover a solo performer with nobody on lights. Fourteen built-in programs run from the RF remote at up to 25 meters. The foot controller handles mode, black out, and program change from the stage. For full control, DMX-512 runs in 3, 5, 9, 12, or 18-channel modes with 0-100% dimming, five dim curves, strobe and pulse effects, and a pixel flip option.

Connections include 3-pin DMX in/out, IEC in and out to daisy chain power, two power plugs on the rear for other fixtures, and a 5-pin DMX input for the foot controller. The whole system draws 144W max and weighs 35 lb.