VF Volcano EP

The VF Volcano EP is a 750W vertical fog machine that shoots fog straight up and colors it on the way out with six 3W RGB LEDs (two red, two green, two blue). The plume climbs over 15 feet, and because the LEDs sit at the nozzle, the column reads as solid color rather than white fog lit from across the room.

Output is rated at 8,000 cubic feet per minute with fluid consumption at 14 ml/min from a 1-liter external tank. Warm-up takes six minutes, a burst runs up to eight seconds, and the average reheat interval is 9.3 seconds thanks to Electronic Thermo Sensing, which holds the heater at temperature between shots. A high-performance Italian pump feeds the block, and the heating element uses an oil-type transmission pipeline design that reduces the chance of clogging over long runs.

Two operating modes cover most gigs. The manual trigger button on the rear panel fires the machine by hand, and the included VFV-WR wireless remote fires it from the booth. A low fluid LED indicator on the rear tells you when the tank needs topping up before it runs dry mid-set.

Pair it with quick-dissipating fog fluid and the vertical plume produces a CO2 jet look without CO2 tanks or cannons. That makes it workable for small stages, lounges, nightclubs and mobile performances where a full CO2 setup is not realistic.

The unit weighs 7.4 lb, measures 13 in x 8.25 in x 7 in, has a carrying handle, and runs on 120V or 240V (non-switching) with IEC AC input. Use high quality, water-based fog fluid only.