Pair Hifonics HCC46CX 4x6" 75 Watt 2-Way Coaxial Car Stereo Speakers
HIFONICS
Pair Hifonics HCC46CX 4x6" 75 Watt 2-Way Coaxial Car Stereo Speakers
Pair Hifonics HCC46CX 4x6" 75 Watt 2-Way Coaxial Car Stereo Speakers
4x6" 2-Way Coaxial Car Speakers, 40W RMS/75W Peak, Aluminum Dome Tweeters, Sold As A Pair
Features
- 40W RMS and 75W peak handling per speaker, sold as a pair
- Fits 4x6in factory openings with a 5.5in x 3.84in cut-out
- 1in aluminum dome tweeters for extended, natural highs
- Blue woven fiber cones with butyl rubber surrounds
- 88dB sensitivity plays loud on factory head unit power
Couldn't load pickup availability
What's Included in the box
- Two Hifonics HCC46CX 4x6in 2-Way Coaxial Speakers
SKU: SKU: HCC46CX
View full details





Product Description
A 1-inch aluminum dome tweeter at the center of the cone sharpens the top end and keeps detail present over road and wind noise. The lightweight blue woven fiber cone reacts quickly through the midrange, and a butyl rubber surround adds mid-bass output while holding up to cabin heat. A passive Butterworth crossover at 6kHz with a 12dB slope keeps the transition between the two elements clean.
A pure copper voice coil on a Kapton former dissipates heat, an epoxy-infused natural fiber spider keeps the cone centered under power, and the over-coil cooling system exchanges air across the coil through the spider. A ferrite magnet keeps the motor compact enough for factory pockets, and an anti-resonant stamped steel basket keeps frame flex and ringing out of the sound.
Mounting uses a 5.5in x 3.84in cut-out with a 5.94in x 3.84in outside diameter and 3.0in of depth. Frequency response runs 80Hz to 20kHz. Grilles are not supplied, since these normally install behind a factory panel or dash cover. The pair weighs 2.65 lb.
Features
-
Made For Oval Openings
A 5.5in x 3.84in cut-out matches the 4x6 factory locations in truck dashes and rear decks, so the swap needs no bracket or cutting.
-
Clear Over Road Noise
One-inch aluminum dome tweeters push detail past wind and tire noise, which is where thin factory speakers usually give up first.
-
Midbass With Weight
Butyl rubber surrounds and lightweight woven fiber cones add punch through the midbass while standing up to heat and years of sun.
-
Runs On Factory Power
At 88dB sensitivity these reach useful volume from a stock head unit, so the upgrade pays off before an amplifier is added.
-
Heat Handled Inside
A copper voice coil on a Kapton former and over-coil cooling move heat out of the motor during long drives at high volume.
Technical Specifications
- Product Type 4x6in 2-Way Coaxial Car Speakers (Pair)
- Series COLOSSUS Classic
- Speaker Size 4 x 6 in
- RMS Power Handling 40W
- Peak Power Handling 75W
- Frequency Response 80Hz-20kHz
- Sensitivity 88 dB
- Tweeter 1in Aluminum Dome
- Cone Material Woven Fiber
- Surround Butyl Rubber
- Crossover Passive Butterworth, 6kHz at 12dB
- Magnet Ferrite
- Mounting Cut-Out 5.5 x 3.84 in
- Outside Diameter 5.94 x 3.84 in
- Mounting Depth 3.0 in
- Grilles Not Included
- Color Black/Blue
- Compatible Vehicles Universal
- Weight 2.65 lb
- Dimensions 10.25in x 7.25in x 2.94in