HFX12D4
HIFONICS
HFX12D4
HFX12D4
12" Car Subwoofer, 400W RMS/800W Peak, Dual 4-Ohm Voice Coils, Sealed Or Ported Enclosures
Features
- 400W RMS and 800W peak power handling
- Dual 4-ohm voice coils wire to a 2-ohm or 8-ohm final load
- Works in sealed and ported enclosures
- Injected poly cone with 1in NBR reinforced rubber surround
- Chrome stamped steel basket with a vented back plate
Couldn't load pickup availability
What's Included in the box
- Hifonics HFX12D4 12in Subwoofer
SKU: SKU: HFX12D4
View full details






Product Description
It works in both sealed and ported enclosures. A sealed box at 1.25 cubic feet keeps the response tight for music with fast bass lines, while a ported box between 1.6 and 2.0 cubic feet trades some of that control for more output on the low notes. Mounting depth is 5-5/8in with a 10-15/16in mounting diameter, so it calls for a full-size enclosure rather than a shallow one.
An injected poly cone stays light and rigid through 6.5mm of excursion, and a 1-inch NBR reinforced rubber surround allows that travel without tearing. A one-piece poly cotton spider keeps the cone assembly centered, and a poly light dust cap finishes it. High-temperature KSV voice coils and a heat dispersing vented back plate move heat away from the motor during long sessions at volume.
The chrome stamped steel basket, heavy-duty ABS motor cover, and anti-resonant rubber ABS boot handle the vibration and abuse of a vehicle install. Sensitivity is 87.25dB, so it responds well to moderate amplifier power rather than demanding the largest amplifier on the shelf. Spade style terminals accept common speaker connectors.
Features
-
Two Ways To Build It
A 1.25 cubic foot sealed box keeps bass tight and accurate, while a 1.6 to 2.0 cubic foot ported box trades some control for more output.
-
Wiring Options
Dual 4-ohm voice coils wire to a 2-ohm or 8-ohm final load, so one sub or a pair can match the amplifier already in the vehicle.
-
Travel Without Tearing
An injected poly cone with 6.5mm of excursion and a 1-inch NBR reinforced rubber surround handle long throw without fatiguing the moving assembly.
-
Heat Out Of The Motor
High-temperature KSV voice coils, a vented back plate, and a large air cooled magnet assembly move heat away during long sessions at volume.
-
Built For Vehicle Abuse
A chrome stamped steel basket, heavy-duty ABS motor cover, and anti-resonant rubber boot handle the vibration that comes with every mile.
Technical Specifications
- Product Type 12in Car Subwoofer
- Series HF
- Subwoofer Size 12 in
- Voice Coils 2
- Impedance Dual 4 Ohm
- Final Impedance Options 2 Ohm or 8 Ohm
- RMS Power Handling 400W
- Peak Power Handling 800W
- Sensitivity 87.25 dB
- Xmax 6.5 mm
- Mounting Diameter 10-15/16 in
- Mounting Depth 5-5/8 in
- Cone Material Injected Poly
- Surround 1in NBR Reinforced Rubber
- Spider One-Piece Poly Cotton
- Basket Chrome Stamped Steel
- Terminals Spade Style
- Shallow Mount No
- Enclosure Type Sealed or Ported
- Sealed Box Volume 1.25 cu ft
- Ported Box Volume 1.6-2.0 cu ft