Skip to product information
1 of 7

HIFONICS

ZS35CX

ZS35CX

3.5" 2-Way Coaxial Car Speakers, 250W Peak Per Pair, 1" Neo-Mylar Soft Dome Tweeters, No Grills
Regular price $24.95
Sale price $24.95 Regular price $29.99
Save 16%
Shipping calculated at checkout.
Features
    • 25W RMS and 125W peak per speaker at 4 ohms
    • 88 dB sensitivity plays clean off head unit power
    • 1 in neo-Mylar soft dome tweeter with 6kHz passive crossover
    • Alpha-cellulose cone with moisture resistant rubber surround
    • 3.41 in cutout and 1.5 in depth fits factory dash openings
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • 2 x ZS35CX 3.5" 2-Way Coaxial Speakers

SKU: SKU: ZS35CX

View full details

Product Description

The Hifonics ZS35CX is a pair of 3.5 inch 2-way coaxial speakers built as a direct replacement for factory dash and pillar locations. Each speaker handles 25W RMS and 125W peak, for 50W RMS and 250W peak per pair, at 4 ohms, so they run off head unit power or a low-power amplifier channel.

Sensitivity is 88 dB at 1W/1m and response spans 80Hz to 20kHz. In a small dash location that combination matters more than raw wattage: these play noticeably cleaner than aged paper factory speakers at the same volume, with real high frequency detail instead of muffled top end.

The 1 inch neo-Mylar soft dome tweeter is impact resistant and crosses over at 6kHz through a passive Butterworth network at 12dB per octave, so the handoff from midrange to treble stays even. The woofer uses an alpha-cellulose cone for low mass and stiffness, a moisture resistant rubber surround for midbass output, a pure copper voice coil on a Kapton former, and an epoxy infused natural fiber spider. Overcoil cooling moves air across the voice coil through the spider during long listening sessions.

The anti-resonant stamped steel basket resists flex and ringing, and a ferrite motor keeps the magnet structure small enough for shallow dash pockets. Mounting cutout is 3.41 in with 1.5 in of depth. Spade connectors or direct solder handle the wiring. No grills are included, since these mount in factory dash openings that already have a cover.

Features

    • Fits Factory Dash Openings

      A 3.41 in cutout with only 1.5 in of mounting depth drops into stock dash and pillar locations, so no cutting or bracket fabrication is needed.

    • Clean Output Without An Amp

      88 dB sensitivity and a 25W RMS rating mean head unit power is enough for a clear step up over worn factory paper speakers.

    • Detail At The Top End

      A 1 in neo-Mylar soft dome tweeter crossed at 6kHz through a passive Butterworth network keeps vocals and cymbals distinct instead of muffled.

    • Cone Material That Holds Up

      Alpha-cellulose cones stay light for quick response and rigid for midbass, paired with a moisture resistant rubber surround for cabin humidity and heat.

    • Built To Stay Quiet

      An anti-resonant stamped steel basket resists flex and ringing, so the sound you hear comes from the cone rather than the frame around it.

Technical Specifications

  • Product Type 3.5" 2-Way Coaxial Car Speakers (Pair)
  • RMS Power Handling (CEA426B) 25W Per Speaker
  • Max Power 125W Per Speaker / 250W Per Pair
  • Impedance 4 Ohms
  • Frequency Response (+/- 3dB) 80Hz-20kHz
  • Sensitivity (1W/1m) 88 dB
  • Crossover Point 6kHz
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov