Skip to product information
1 of 7

HIFONICS

ZS46CX

ZS46CX

4x6" 2-Way Coaxial Car Speakers, 400W Peak Per Pair, 1" Neo-Mylar Soft Dome Tweeters, No Grills
Regular price $27.95
Sale price $27.95 Regular price $34.99
Save 20%
Shipping calculated at checkout.
Features
    • 40W RMS and 200W peak per speaker at 4 ohms
    • 55Hz-19kHz response gives real midbass from a 4x6 opening
    • 1 in neo-Mylar soft dome tweeter with 6kHz passive crossover
    • Alpha-cellulose cone with moisture resistant rubber surround
    • Direct fit for factory 4x6 dash and rear deck locations
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • 2 x ZS46CX 4x6" 2-Way Coaxial Speakers

SKU: SKU: ZS46CX

View full details

Product Description

The Hifonics ZS46CX is a pair of 4x6 inch 2-way coaxial speakers made for the oval factory openings found in dashes and rear decks across a wide range of vehicles. Each speaker handles 40W RMS and 200W peak, for 80W RMS and 400W peak per pair, at 4 ohms.

Response runs 55Hz to 19kHz with 88 dB sensitivity, so they work well off head unit power and step up further with 40W of amplifier power per channel. The lower end of that range gives real midbass, which is where most 4x6 factory speakers give up first.

Each speaker pairs an alpha-cellulose cone with a moisture resistant rubber surround for midbass impact, a pure copper voice coil on a Kapton former for heat dissipation, and an epoxy infused natural fiber spider. Overcoil cooling exchanges air across the voice coil through the spider under sustained power. The 1 inch neo-Mylar soft dome tweeter is impact resistant and crosses over at 6kHz through a passive Butterworth network at 12dB per octave for an even handoff between the two.

An anti-resonant stamped steel basket minimizes flex and ringing, and a ferrite motor keeps the magnet compact. Cutout is 5.5 x 3.46 in with an outside diameter of 5.94 x 3.84 in and 3 in of mounting depth, so check clearance behind rear deck and dash panels before ordering. Spade connectors or direct solder handle wiring. No grills are included; typical installation mounts these behind a factory panel or dash cover.

Features

    • Direct Fit For 4x6 Openings

      A 5.5 x 3.46 in cutout matches factory oval locations in dashes and rear decks, so the swap is a drop-in on most vehicles that use this size.

    • Midbass From A Small Frame

      55Hz-19kHz response with a rubber surround and alpha-cellulose cone pulls real low end out of an opening most factory speakers struggle with.

    • Works With Or Without An Amp

      88 dB sensitivity means head unit power is enough to start, and 40W RMS per speaker leaves room to add an amplifier later.

    • Even Handoff To The Tweeter

      A passive Butterworth crossover at 6kHz and 12dB per octave keeps the transition between cone and 1 in tweeter free of harshness.

    • Heat Handling Under Load

      A pure copper voice coil on a Kapton former with overcoil cooling moves heat away during long high-volume listening, protecting output over time.

Technical Specifications

  • Product Type 4x6" 2-Way Coaxial Car Speakers (Pair)
  • RMS Power Handling (CEA426B) 40W Per Speaker
  • Max Power 200W Per Speaker / 400W Per Pair
  • Impedance 4 Ohms
  • Frequency Response (+/- 3dB) 55Hz-19kHz
  • Sensitivity (1W/1m) 88 dB
  • Crossover Point 6kHz
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov