CRA-202DJ

The Hosa CRA-202DJ connects a turntable to an amplifier, DJ mixer, or phono preamp. Two RCA legs carry left and right, and a separate ground wire ties the turntable chassis to the ground terminal on the receiving gear, which is what kills the hum that shows up when a deck is left ungrounded.

At 6 ft, it suits the tight geometry of a DJ setup: decks flanking a mixer, a turntable sitting beside a receiver, or a deck feeding a phono preamp in a rack directly below. Short runs also mean less cable to coil and less slack to trip over in a booth.

Nickel-plated plugs resist corrosion and handle repeated swaps between decks and channels. Oxygen-Free Copper conductors keep resistance low, which matters at phono level where the signal is thousands of times weaker than line level and any loss shows. OFC spiral shields reject EMI and RFI from the turntable motor, power bricks, and lighting, keeping the noise floor low under the music.

Works with any turntable that requires a ground wire, from a modern DJ deck to a vintage home unit.