JBL AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker
JBL AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker
JBL
JBL AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker
JBL AWC82 8" 200 Watt Indoor/Outdoor 70V Surface Mount Commercial Speaker
All-Weather 8" Two-Way Coaxial Speaker, IP56, 200W 70V/100V Taps, U-Bracket Included, Gray
Free Shipping
Features
- IP56 rating handles rain, dust, salt air, and UV exposure
- 8" Kevlar-reinforced woofer paired with a 1 in exit compression driver
- Consistent 120 degree coverage keeps speech clear across the pattern
- 70V/100V taps up to 200W or direct 8 ohm operation
- Color-matched steel U-bracket included for wall or ceiling mounting
Couldn't load pickup availability
What's Included in the box
- AWC82 all-weather coaxial loudspeaker
- Color-matched steel U-bracket
SKU: SKU: AWC82 U
View full details








Product Description
An IP56 rating covers dust ingress and water jets, and the cabinet exceeds Mil Spec 810 for humidity, salt spray, temperature, and UV exposure, plus ASTM G85 acid-air and salt-spray testing over 336 hours. In practice that means poolside, dockside, and stadium concourse installs hold up for years rather than seasons.
Wiring is flexible. A built-in transformer offers taps of 70V: 200W, 100W, 50W, 25W; 100V: 200W, 100W, 50W or direct 8 ohm low-impedance operation, so the same speaker works on a long distributed line or on a dedicated amplifier channel. Power handling is 250 W for 2 hours and 200 W over 100 hours, with 94 dB sensitivity producing 118 dB maximum SPL at 1 m in direct mode. Frequency range spans 80 Hz - 20 kHz at -10 dB.
A high-slope passive crossover at 1.8 kHz keeps midrange natural through the transition, and SonicGuard overload protection limits the high-frequency driver before damage occurs. The ABS with glass enclosure is heavily braced, the corrosion-resistant steel grille uses a three-layer foam and poly mesh assembly, and terminals sit under a covered barrier strip with a gland nut that seals against round-jacketed cable. A color-matched steel U-bracket ships with every unit. Each cabinet measures 11.8 x 11.8 x 12.0 in and weighs 21.5 lb.
Features
-
Survives Real Weather
An IP56 rating plus Mil Spec 810 and ASTM G85 testing means rain, salt spray, and UV exposure will not shorten the life of a poolside or dockside install.
-
Clear Speech, Real Music
A coaxial 8" woofer and 25 mm (1 in) exit compression driver cover 80 Hz - 20 kHz at -10 dB, carrying announcements and background music from the same cabinet.
-
Two Ways To Wire It
Built-in 70V/100V transformer taps up to 200W handle long distributed runs, while direct 8 ohm mode suits a dedicated amplifier channel.
-
Predictable Coverage
A 120 degree pattern with a high-slope crossover at 1.8 kHz keeps tone consistent, so listeners at the edge hear what listeners on axis hear.
-
Mounts And Aims Easily
A color-matched steel U-bracket ships in the box, attaching at two M10 points with an M6 secondary safety point on the rear panel.
Technical Specifications
- Product Type All-Weather Two-Way Coaxial Surface-Mount Loudspeaker
- LF Driver 8" Kevlar-Reinforced Cone With Weather Treatment, 50 mm (2 in) Voice Coil
- HF Driver 25 mm (1 in) exit compression driver with high temperature polymer diaphragm
- Frequency Range (-10 dB) 80 Hz - 20 kHz
- Frequency Response (+/-3 dB) 100 Hz - 20 kHz
- Coverage Pattern 120 x 120 degrees
- System Power Rating 250 W, 2 hrs; 200 W, 100 hrs
- Sensitivity (2.83V @ 1 m) 94 dB
- Maximum SPL (1 m) Direct 8 Ohm: 118 dB, Peaks Of 124 dB
- Crossover Network 1.8 kHz, High-Slope Passive
- Nominal Impedance 8 Ohms
- Transformer Taps 70V: 200W, 100W, 50W, 25W; 100V: 200W, 100W, 50W
- HF Driver Protection SonicGuard Overload Protection
- Enclosure ABS With Glass, Heavily Braced
- Grille Corrosion-Resistant Zinc-Rich Powder Coated Steel, Three-Layer
- Color Gray
- Environmental IP56 Per IEC529; Exceeds Mil Spec 810 and ASTM G85
- Included Accessories Color-Matched Steel U-Bracket
- Weight 21.5 lb Each, 25.5 lb With U-Bracket
- Dimensions (H x W x D) 11.8 x 11.8 x 12.0 in