JBL CBT 70J-1 500w 2-Way Swivel Wall Mount Line Array Column Speaker in Black
JBL
JBL CBT 70J-1 500w 2-Way Swivel Wall Mount Line Array Column Speaker in Black
JBL CBT 70J-1 500w 2-Way Swivel Wall Mount Line Array Column Speaker in Black
Line Array Column Speaker, 500W, 60 Hz-20 kHz, Switchable 25/45 Degree Coverage, Swivel/Tilt Bracket Included
Features
- Four 5 in woofers and sixteen 1 in tweeters in a 27.4 in column
- 500 W power handling at 8 ohms with 131 dB peak SPL
- Switchable 25 or 45 degree vertical coverage, 150 degrees horizontal
- Music or speech voicing switch plus SonicGuard overload protection
- Swivel and tilt wall bracket included with 80 degree aiming range
Couldn't load pickup availability
What's Included in the box
- JBL CBT 70J-1 line array column speaker (black)
- Swivel (pan) and tilt wall bracket
SKU: SKU: CBT 70J-1
View full details











Product Description
Constant Beamwidth Technology uses analog delay beam-forming and amplitude tapering to hold consistent vertical coverage without the narrow beaming and out-of-coverage lobing that straight column speakers produce. Asymmetrical vertical aiming pushes more sound to the far area of the room, so the last row hears close to what the first row does.
A switch selects vertical coverage: 45 degrees for medium-throw rooms or 25 degrees for long-throw work. A second switch sets voicing, either flat for music or a mid-range presence peak for speech reinforcement. Horizontal coverage stays at 150 degrees, wide enough for seating that spreads well past the cabinet.
Power handling is 500 W with 2000 W peaks at 8 ohms, and sensitivity reaches 98 dB in narrow speech mode for 125 dB continuous SPL at one meter. Dynamic SonicGuard overload protection watches the high-frequency section, so a hot input does not cost you tweeters.
The fiberglass-reinforced ABS cabinet and painted aluminum grille are IP-55 rated with the optional MTC-PC2 panel cover and resist UV, moisture, and 200 hours of ASTM G85 acid-air and salt spray. The included swivel and tilt bracket allows plus or minus 80 degrees of left-right aiming and plus or minus 15 degrees of tilt, with ten M6 insert points on the back panel. Cabinet weight is 21 lb.
Features
Speech That Stays Intelligible
Analog delay beam-forming and amplitude tapering hold vertical pattern control tight, keeping sound off reflective ceilings in rooms where reverb kills clarity.
Two Throw Distances, One Switch
Vertical coverage toggles between 45 degrees for medium-throw rooms and 25 degrees for long-throw applications, so one model fits both jobs.
Consistent Back-Row Level
Asymmetrical vertical coverage sends more sound toward the far end of the room, closing the gap between front-row and back-row levels.
Tweeter Protection Built In
Dynamic SonicGuard limits overload on the sixteen high-frequency devices, so an over-driven input during an event does not cost you a repair.
Aim It After It's Mounted
The included bracket swivels plus or minus 80 degrees left to right and tilts plus or minus 15 degrees with 5 degree detents for repeatable aiming.
Technical Specifications
- Product Type Two-Way Passive Line Array Column Speaker
- Drivers Four 5 in LF drivers, sixteen 1 in HF drivers
- Frequency Range (-10 dB) 60 Hz - 20 kHz
- Power Rating 500 W (2000 W peak) 2 hrs, 350 W (1400 W peak) 100 hrs
- Vertical Coverage Switchable 25 degrees narrow or 45 degrees broad
- Horizontal Coverage 150 degrees
- Sensitivity Up to 98 dB narrow speech mode
- Maximum SPL (1m) Up to 125 dB continuous average, 131 dB peak
- Impedance 8 ohms
- Voicing Switchable music or speech
- Protection Dynamic SonicGuard HF overload protection
- Enclosure Fiberglass reinforced ABS, painted aluminum grille
- Outdoor Rating IP-55 per IEC529 with optional MTC-PC2 cover, ASTM G85 200 hrs
- Mounting Ten M6 rear inserts, swivel/tilt wall bracket included
- Color Black
- Weight 21 lb
- Dimensions 27.4 x 6.7 x 9.3 in (H x W x D)