2 JBL Control 23-1 3" Indoor/Outdoor 70v Commercial Wall Mount Speakers in Black
2 JBL Control 23-1 3" Indoor/Outdoor 70v Commercial Wall Mount Speakers in Black
JBL
2 JBL Control 23-1 3" Indoor/Outdoor 70v Commercial Wall Mount Speakers in Black
2 JBL Control 23-1 3" Indoor/Outdoor 70v Commercial Wall Mount Speakers in Black
3" Two-Way Indoor/Outdoor Speaker Pair, 50W At 8 Ohms, 15W 70V Taps, InvisiBall Mounting Hardware Included
Free Shipping
Features
- 3 in woven-fiberglass woofer and 0.5 in PEI tweeter cover 70 Hz to 20 kHz
- 50 W at 8 ohms or 70V taps at 15 W, 7.5 W, 3.7 W and 1.8 W
- Wide 100 by 100 degree coverage from a cabinet under 8 in tall
- IP-44 rated with weather-resistant enclosure and transducers
- InvisiBall mounting hardware hides behind the logo badge
Couldn't load pickup availability
What's Included in the box
- Two Control 23-1 speakers (black)
- Two InvisiBall wall-mounting systems
- 4 mm x 80 mm hex key
SKU: SKU: Control 23-1 U
View full details








Product Description
Coverage is 100 by 100 degrees, tight enough to place speakers along a wall without heavy overlap and wide enough that people are not walking through dead zones. Sensitivity is 86 dB and power handling is 50 W continuous pink noise at 8 ohms with 100 W program, giving 103 dB continuous SPL at one meter. That covers foreground music and paging in retail, cafes, health clubs, hospitality, and theme parks.
Wiring goes either way. Use the 8 ohm thru setting for a local amplifier, or select the built-in multi-tap transformer at 15 W, 7.5 W, 3.7 W, or 1.8 W on 70V lines (100V: 15 W, 7.5 W, 3.7 W) with less than 0.43 dB insertion loss at any tap.
Mounting uses JBL's InvisiBall system, which is included. The hardware hides behind the logo badge, so there is no visible bracket and no obvious way to remove the speaker, which helps in public spaces. Two 6 mm attachment points accept the optional MTC-23UB-1 U-bracket, and a safety loop sits on the back panel.
The enclosure is high-impact polystyrene with a zinc-plated powder-coated grille, rated IP-44 and tested past Mil Spec 810 for humidity, salt spray, temperature, and UV. Finished in black, each speaker weighs 4.0 lb and measures 7.9 x 5.6 x 4.4 in.
Features
Full Sound From A Small Box
A 3 in fiberglass woofer and fluid-cooled PEI tweeter reach 70 Hz to 20 kHz, so music keeps its body in a cabinet only 7.9 in tall.
No Visible Bracket
The included InvisiBall system mounts through a hidden access point behind the logo badge, leaving clean walls and deterring theft in public spaces.
Wire It Two Ways
Run 50 W at 8 ohms from a local amplifier, or switch to 70V taps at 15 W down to 1.8 W for a long distributed run.
Rain And Salt Air Rated
An IP-44 enclosure that exceeds Mil Spec 810 for humidity, salt spray, and UV holds up on covered patios, poolside areas, and theme park walkways.
Wide Coverage, Fewer Units
The 100 by 100 degree pattern spreads sound evenly along a wall, so a layout needs fewer speakers to reach every spot in the room.
Technical Specifications
- Product Type 3 in Two-Way Indoor/Outdoor Surface-Mount Speaker (Pair)
- Frequency Range (-10 dB) 70 Hz - 20 kHz
- Frequency Response (+/-3 dB) 95 Hz - 19 kHz
- Power Rating 50 W (200 W peak) continuous pink noise, 100 W continuous program
- Sensitivity 86 dB, 1W/1m
- Coverage Angle 100 degrees H x 100 degrees V
- Maximum SPL (1m) 103 dB average continuous, 109 dB peak
- Impedance 8 ohms (thru setting)
- Transformer Taps 70V: 15 W, 7.5 W, 3.7 W, 1.8 W / 100V: 15 W, 7.5 W, 3.7 W
- Drivers 3 in woven-fiberglass cone woofer, 0.5 in PEI diaphragm tweeter
- Crossover Type 2nd order low-pass, 2nd order high-pass
- Enclosure High impact polystyrene
- Grille Zinc-plated steel with TGIC polyester powder coating
- Outdoor Rating IP-44 per IEC529, exceeds Mil Spec 810, ASTM G85 tested
- Mounting InvisiBall wall-mount system included
- Color Black (RAL9004)
- Weight 4.0 lb each
- Dimensions 7.9 x 5.6 x 4.4 in (H x W x D)