Skip to product information
1 of 8

JBL

2 JBL Control 23-1-WH 3" Indoor/Outdoor 70v Commercial White Wall Mount Speakers

2 JBL Control 23-1-WH 3" Indoor/Outdoor 70v Commercial White Wall Mount Speakers

3" Two-Way Indoor/Outdoor Speaker Pair, 50W At 8 Ohms, 15W 70V Taps, InvisiBall Mounting Hardware Included

Free Shipping

Regular price $259.95
Sale price $259.95 Regular price $359.88
Save 27%
Shipping calculated at checkout.
Features
    • 3 in woven-fiberglass woofer and 0.5 in PEI tweeter cover 70 Hz to 20 kHz
    • 50 W at 8 ohms or 70V taps at 15 W, 7.5 W, 3.7 W and 1.8 W
    • Wide 100 by 100 degree coverage from a cabinet under 8 in tall
    • IP-44 rated with weather-resistant enclosure and transducers
    • InvisiBall mounting hardware hides behind the logo badge
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Two Control 23-1 speakers (white)
    • Two InvisiBall wall-mounting systems
    • 4 mm x 80 mm hex key

SKU: SKU: Control 23-1-WH

View full details

Product Description

The JBL Control 23-1 is an ultra-compact two-way speaker for spots where a full-size box would look wrong and sound overkill. A 3 in woven-fiberglass woofer and a 0.5 in PEI diaphragm tweeter with fluid cooling cover 70 Hz to 20 kHz, which is a genuinely wide range for a cabinet this small.

Coverage is 100 by 100 degrees, tight enough to place speakers along a wall without heavy overlap and wide enough that people are not walking through dead zones. Sensitivity is 86 dB and power handling is 50 W continuous pink noise at 8 ohms with 100 W program, giving 103 dB continuous SPL at one meter. That covers foreground music and paging in retail, cafes, health clubs, hospitality, and theme parks.

Wiring goes either way. Use the 8 ohm thru setting for a local amplifier, or select the built-in multi-tap transformer at 15 W, 7.5 W, 3.7 W, or 1.8 W on 70V lines (100V: 15 W, 7.5 W, 3.7 W) with less than 0.43 dB insertion loss at any tap.

Mounting uses JBL's InvisiBall system, which is included. The hardware hides behind the logo badge, so there is no visible bracket and no obvious way to remove the speaker, which helps in public spaces. Two 6 mm attachment points accept the optional MTC-23UB-1 U-bracket, and a safety loop sits on the back panel.

The enclosure is high-impact polystyrene with a zinc-plated powder-coated grille, rated IP-44 and tested past Mil Spec 810 for humidity, salt spray, temperature, and UV. Finished in white, each speaker weighs 4.0 lb and measures 7.9 x 5.6 x 4.4 in.

Features

    • Full Sound From A Small Box

      A 3 in fiberglass woofer and fluid-cooled PEI tweeter reach 70 Hz to 20 kHz, so music keeps its body in a cabinet only 7.9 in tall.

    • No Visible Bracket

      The included InvisiBall system mounts through a hidden access point behind the logo badge, leaving clean walls and deterring theft in public spaces.

    • Wire It Two Ways

      Run 50 W at 8 ohms from a local amplifier, or switch to 70V taps at 15 W down to 1.8 W for a long distributed run.

    • Rain And Salt Air Rated

      An IP-44 enclosure that exceeds Mil Spec 810 for humidity, salt spray, and UV holds up on covered patios, poolside areas, and theme park walkways.

    • Wide Coverage, Fewer Units

      The 100 by 100 degree pattern spreads sound evenly along a wall, so a layout needs fewer speakers to reach every spot in the room.

Technical Specifications

  • Product Type 3 in Two-Way Indoor/Outdoor Surface-Mount Speaker (Pair)
  • Frequency Range (-10 dB) 70 Hz - 20 kHz
  • Frequency Response (+/-3 dB) 95 Hz - 19 kHz
  • Power Rating 50 W (200 W peak) continuous pink noise, 100 W continuous program
  • Sensitivity 86 dB, 1W/1m
  • Coverage Angle 100 degrees H x 100 degrees V
  • Maximum SPL (1m) 103 dB average continuous, 109 dB peak
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov