Skip to product information
1 of 8

JBL

(2) JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers

(2) JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers

5.25" Two-Way Indoor/Outdoor Speaker Pair, 200W Program, 30W 70V Taps, InvisiBall Mounting Hardware Included

Free Shipping

Regular price $470.00
Sale price $470.00 Regular price $484.26
Save $14.26
Shipping calculated at checkout.
Features
    • 5.25 in woven-fiberglass woofer and 0.75 in PEI diaphragm tweeter
    • 200 W program handling at 8 ohms with 90 dB sensitivity
    • 70V taps at 30 W, 15 W, 7.5 W and 3.7 W for distributed lines
    • IP-44 weatherized enclosure tested past Mil Spec 810 for salt and UV
    • InvisiBall hardware mounts through a hidden point behind the badge
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Two Control 25-1 speakers (black)
    • Two InvisiBall wall-mounting systems

SKU: SKU: Control 25-1

View full details

Product Description

The JBL Control 25-1 is a two-way 5.25 in indoor and outdoor monitor for venues, health clubs, theme parks, cafes, and anywhere foreground music and paging share the same speaker. This pair handles 200 W of program material at 8 ohms with 90 dB sensitivity, so a modest amplifier gets loud.

The 5.25 in woven-fiberglass woofer uses a butyl rubber surround with WeatherEdge frame protection, a high-temperature Kapton voice coil former, and a linear suspension spider. Cone geometry is shaped for consistent response off-axis, which matters in rooms where people are rarely standing on the speaker's centerline. The 0.75 in PEI diaphragm tweeter with ferro-magnetic fluid keeps the high end even rather than sharp.

Coverage is 100 by 100 degrees, and frequency response runs 60 Hz to 20 kHz at minus 10 dB, 85 Hz to 17 kHz within plus or minus 3 dB.

Wiring works either way. Take the 8 ohm thru setting for a local amplifier, or select the built-in multi-tap transformer at 30 W, 15 W, 7.5 W, or 3.7 W on 70V lines (100V: 30 W, 15 W, 7.5 W) with under 0.94 dB insertion loss at any tap.

JBL's InvisiBall mounting hardware installs through a hidden access point behind the logo badge, so nothing visible holds the speaker to the wall and casual removal is not an option. The high-impact polystyrene enclosure and zinc-plated grille carry IP-44 protection, exceed Mil Spec 810 for humidity, salt spray, temperature, and UV, and pass ASTM G85 acid-air and salt-spray testing.

The black finish takes paint, so the speakers can match any wall. Each unit measures 9.6 x 7.4 x 5.7 in and weighs 7.5 lb.

Features

    • Loud From A Small Amplifier

      Sensitivity of 90 dB and 200 W program handling mean a modest amplifier channel reaches high output across a patio, gym floor, or cafe.

    • Sounds Right Off-Axis

      Optimized cone geometry and a fluid-cooled PEI tweeter keep response even for listeners standing well off the speaker's centerline, which is most of the room.

    • Invisible Mounting

      InvisiBall hardware installs through a hidden access point behind the logo badge, leaving no visible bracket and deterring walk-off in public areas.

    • Built For Weather

      WeatherEdge frame protection, Kapton voice coil formers, and an IP-44 enclosure handle rain, heat, and salt air in covered outdoor installations.

    • Paint It To Match

      The high-impact polystyrene cabinet accepts a range of finishes and pigments, so the speakers can blend into any wall color on site.

Technical Specifications

  • Product Type 5.25 in Two-Way Indoor/Outdoor Surface-Mount Speaker (Pair)
  • Frequency Response (+/-10 dB) 60 Hz - 20 kHz
  • Frequency Response (+/-3 dB) 85 Hz - 17 kHz
  • Power Rating 200 W continuous program, 100 W (400 W peak) continuous pink noise
  • Sensitivity 90 dB, 1W/1m
  • Coverage Angle 100 degrees x 100 degrees
  • Nominal Impedance 8 ohms (thru setting)
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov